will the newer style thermostat and housing work on a 99 water pump
#1
TECH Resident
Thread Starter
Join Date: Dec 2006
Location: Enid, OK
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
will the newer style thermostat and housing work on a 99 water pump
My 99 needs a thermostat due to a slow warm up. Like 12 miles before at full operating temp slow. I would prefer to use the later style T stat if I can but will it fit in the 99s original water pump? Right now its got the style where the t stat is part of the water outlet.
#2
TECH Regular
Join Date: Apr 2007
Location: Sault Ste Marie, Ontario
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
03 and later pump that uses a thermostat with a separate housing, the diameter of the thermostat hole in the newer style water pump is smaller, so im going to say no
Last edited by Black-Jacket; 11-06-2011 at 11:07 AM.
#5
Launching!
iTrader: (7)
Join Date: Aug 2010
Location: baxley,ga
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
i think it was 04 when they changed it and the hole is smaller in 04-up but yes you can use 04-up thermostat and housing on a 99-03..i just did it.my 04 water pump starting poring after i got my motor back in and i had a 03 water pump laying around.the hole was bigger in it but i still used my 04 thermostat and housing and i had no leaks
#6
TECH Resident
Thread Starter
Join Date: Dec 2006
Location: Enid, OK
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
i think it was 04 when they changed it and the hole is smaller in 04-up but yes you can use 04-up thermostat and housing on a 99-03..i just did it.my 04 water pump starting poring after i got my motor back in and i had a 03 water pump laying around.the hole was bigger in it but i still used my 04 thermostat and housing and i had no leaks
Trending Topics
#8
TECH Resident
Thread Starter
Join Date: Dec 2006
Location: Enid, OK
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
I got to thinking and whats the difference in the seal? I know on the later style the seal wraps around the thermostat and sits in a recess in the water pump housing. On the 99-03 the thermostat says it includes the seal but I don't recall where the seal is located and if it sits in the water pump or not. Does the 99-03 pump have the recess in it for the seal? Its been so long since I've had one apart I really can't remember.
#9
i could have sworn that when u buy a replacement coolant pump it is set up to take either style stat. i do quite a few of these pumps. i could be wrong but i would think either stat would work. on my truck i have a 99 trans am pump with the seperate t-stat and a small block chevy housing. the car pump originally had the stat built in with the housing. in the pic it still had the t/a housing.