wiring harness for 4.3 to 5.3 swap
#2
TECH Addict
As I understand it (though I've never tried it) that swap in a 1/2 ton is a BITCH because you need to change out EVERYTHING from the fuel-pump to the radiator......wiring harness, motor mounts, exhaust, fuel lines, etc....I can speak with some experience here though because while I've never done it in a 1/2 ton I AM currently doing it in a 1998 S10, and if the S10 swap is ANYTHING like a 1/2 ton swap (and it should be ALOT alike because the motors/trannys are identical) your gonna have a REAL FUN TIME
the Vortec CPI 4.3 uses a completely different computer/fuel setup so NOTHING is compatible between it and the LSx motors
the Vortec CPI 4.3 uses a completely different computer/fuel setup so NOTHING is compatible between it and the LSx motors
#3
TECH Resident
Join Date: Nov 2002
Location: CA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Any harness from a v8 truck will work as long as the harness is made for the tranny you are using, I think there are slight differences in some of the years but im sure someone else here will know that answer
#4
Originally Posted by Yelo
As I understand it (though I've never tried it) that swap in a 1/2 ton is a BITCH because you need to change out EVERYTHING from the fuel-pump to the radiator......wiring harness, motor mounts, exhaust, fuel lines, etc....I can speak with some experience here though because while I've never done it in a 1/2 ton I AM currently doing it in a 1998 S10, and if the S10 swap is ANYTHING like a 1/2 ton swap (and it should be ALOT alike because the motors/trannys are identical) your gonna have a REAL FUN TIME
the Vortec CPI 4.3 uses a completely different computer/fuel setup so NOTHING is compatible between it and the LSx motors
the Vortec CPI 4.3 uses a completely different computer/fuel setup so NOTHING is compatible between it and the LSx motors
#7
TECH Addict
I kinda meant everything up to the radiator....sorry for the mis-information, AFAIK you should be able to use the 4.3 rad.......
you DO have to change the fuel pump though......sorry
you DO have to change the fuel pump though......sorry
Trending Topics
#8
well i just found out that the radiator does have to change, as well as everything else you've stated, including the water pump. the real kick in the butt is the wiring harness for the 5.3. it's 614 bucks....and i'm not sure if it has to be modded any.
#9
single digit dreamer
iTrader: (6)
i say trade it too. your looking at alot of work and some money.
as far as the cost of a wire harness, you can buy a complete driveline that will include the computer, tranny, most of the wireing harness, pcm, lots of sensors, intake, TB, injectors, some accesories. probabably get all of that for under $3000, maybe under $2000 if you take your time and search for it.
as far as the cost of a wire harness, you can buy a complete driveline that will include the computer, tranny, most of the wireing harness, pcm, lots of sensors, intake, TB, injectors, some accesories. probabably get all of that for under $3000, maybe under $2000 if you take your time and search for it.
#10
Originally Posted by parish8
i say trade it too. your looking at alot of work and some money.
as far as the cost of a wire harness, you can buy a complete driveline that will include the computer, tranny, most of the wireing harness, pcm, lots of sensors, intake, TB, injectors, some accesories. probabably get all of that for under $3000, maybe under $2000 if you take your time and search for it.
as far as the cost of a wire harness, you can buy a complete driveline that will include the computer, tranny, most of the wireing harness, pcm, lots of sensors, intake, TB, injectors, some accesories. probabably get all of that for under $3000, maybe under $2000 if you take your time and search for it.
to do the swap, here's the major parts i need so far:
radiator
fuel pump
ECM
motor mounts
water pump
wiring harness
a/c compressor
a/c hoses
starter
am i missing anything?