gs7793

iTrader: (8)

anyone on here running a z06 cam? i watched a vid on youtube of a guy with set of z06 heads and cam and it seemed to run pretty good, but you know how those youtube vids are lol....also does it has pretty much the same lobe seperation my current stock cam now has correct? im not sure of the exact specs

Suddog

iTrader: (10)

Lobe separation on your stock 4.8 cam is 114, LS6 cam is 117.5

Here a link to use to see stock specs of both cams

http://chevythunder.com/LS1%20components.htm#LS6

Enjoy.

gs7793

iTrader: (8)

so theres not much of a noticable difference....thanks for the link man

qwank

iTrader: (4)

I have a whole LS6 in my garage. I'm thinking either dropping in the whole motor or just using the cam and heads with a supercharger.

gs7793

iTrader: (8)

what would yall estimate the rwhp gains would be off adding a z06 cam?

02'Z71ONDUBZ'

iTrader: (8)

Try doing a search and your questions will be answered

Chris05

The ls6 cam is a good upgrade if you plan on going with forced induction. I would look into a tr220 on a 112 or maybe the 114 version. Also I would consider the 212/218 low lift.

Phantom

iTrader: (16)

my truck ran real good with a z06 cam in it

gs7793

iTrader: (8)

hmm. im looking for a near stock idle, so i'll look into those two cams

ChevyMan90

My brother put a Z06 cam in is 2000 5.3 truck this past weekend and it definitly pulls harder up top. He says the bottem end feels about the same. It has a very stock like idle, but you can hear a slight chop in the exhaust note. If you didn't know it was in there you probably would think its stock.