*********Trick t-6 turbo kit, A/W intercooler, 80mm, 5" Downpipe, ********
09-11-2012 | 09:38 PM
#1
*********Trick t-6 turbo kit, A/W intercooler, 80mm, 5" Downpipe, ********
SOLD
SOLD
Well after finding some time to mess with the trucks, the kit wont work without modding it pretty heavily. I decided to go ahead and sell it, and move the truck in a slightly different Trick direction. The kit is still installed on the truck, but I can pull it off rather easily.
You will be purchasing the crossover, Log, downpipe, wastegate, and all the cold side. I will also throw in the drain as well as feed line. The turbo is an 80mm borg warner, with 83mm turbine and 1.10 AR. The whole kit probably has around 3k miles on it. The hot pipes are wrapped, and painted BBQ black. THE kit basically entails all of the first picture.
THE KIT WILL NOT WORK WITH 4WD WITHOUT A NEW CROSSOVER
Asking for $2900 obo, no trades. I am in Abilene Tx, and can possibly meet someone within reason. Or pay actual shipping.
SOLD
Well after finding some time to mess with the trucks, the kit wont work without modding it pretty heavily. I decided to go ahead and sell it, and move the truck in a slightly different Trick direction. The kit is still installed on the truck, but I can pull it off rather easily.
You will be purchasing the crossover, Log, downpipe, wastegate, and all the cold side. I will also throw in the drain as well as feed line. The turbo is an 80mm borg warner, with 83mm turbine and 1.10 AR. The whole kit probably has around 3k miles on it. The hot pipes are wrapped, and painted BBQ black. THE kit basically entails all of the first picture.
THE KIT WILL NOT WORK WITH 4WD WITHOUT A NEW CROSSOVER
Asking for $2900 obo, no trades. I am in Abilene Tx, and can possibly meet someone within reason. Or pay actual shipping.
I am pretty sure we could not of gotten the cold piping any shorter. And still keep an intercooler. The 5" DP was interesting but making 2pc sure makes the install go alot quicker. I bet I could install the kit in under 30min. Did it enough times while working on it.
The 60mm is just freaking HUGE 2 3/8 hole saw and alittle grinding for clean up.
Here are some pics while building the kit.
The 60mm is just freaking HUGE 2 3/8 hole saw and alittle grinding for clean up.
Here are some pics while building the kit.
Last edited by charcold-bowtie; 01-05-2013 at 07:27 PM.
09-12-2012 | 06:15 PM
#5
Yea that kit was unique. The cold piping is the shortest out there. And the 5" dp. All tucks in nicely.
Good price for all the customizing the kit needed to fit like it should.
Good price for all the customizing the kit needed to fit like it should.
just bring cash.