120 lb injectors, 75 lb injectors, acceleronics versafueler injector driver
#1
120 lb injectors, 75 lb injectors, acceleronics versafueler injector driver
75 lb/hr @ 45psi low impedance Delphi injectors track time only as well
***sold***
120 lb/hr @ 45psi trickflow injectors low impedance like new less than 10 track passes
***SOLD***
Trick Flow® TFX
acceleronics versafueler low impedance injector driver used with above injectors
***SOLD***
Acceleronics home page
***sold***
120 lb/hr @ 45psi trickflow injectors low impedance like new less than 10 track passes
***SOLD***
Trick Flow® TFX
acceleronics versafueler low impedance injector driver used with above injectors
***SOLD***
Acceleronics home page
Last edited by 350SS; 05-06-2016 at 01:29 PM.
#4
I AM A MOTHERF*CKER
iTrader: (1)
Since they are low impedance injectors, you need a low impedance driver box like the versafueler shown (but sold) above. It's easy to wire in. I installed mine in 45 minutes.
If memory serves, those 75s are direct fit. If not, you just have to get longed fuel rail bolts and make some spacers. If you search on fuel rail spacers here, I'm sure you will find a thread (it's easy).
If memory serves, those 75s are direct fit. If not, you just have to get longed fuel rail bolts and make some spacers. If you search on fuel rail spacers here, I'm sure you will find a thread (it's easy).
#6
Since they are low impedance injectors, you need a low impedance driver box like the versafueler shown (but sold) above. It's easy to wire in. I installed mine in 45 minutes.
If memory serves, those 75s are direct fit. If not, you just have to get longed fuel rail bolts and make some spacers. If you search on fuel rail spacers here, I'm sure you will find a thread (it's easy).
If memory serves, those 75s are direct fit. If not, you just have to get longed fuel rail bolts and make some spacers. If you search on fuel rail spacers here, I'm sure you will find a thread (it's easy).
That pretty much covers it. I used spacers and bolts that I picked up from Home Depot. You also need EV1 connectors if your harness has the truck style connectors. I have a set of those that I'd be willing to include for the asking price.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
GXPJAY
Trucks and SUV Classifieds
5
02-13-2022 08:15 AM
GrooveCityZ71
GM Engine & Exhaust Performance
7
08-31-2015 12:05 PM