2002 6.0l LQ9 Motor Just Rebuilt! Complete! *BACK UP FOR SALE!*
03-21-2009, 05:26 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Location: New Hampshire
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2002 6.0l LQ9 Motor Just Rebuilt! Complete! *BACK UP FOR SALE!*
Ok believe it or not its back up for sale! I ended up buying the motor back from the guy who bought it acouple weeks ago due to personal problems so being a good friend I helped him out.
2002 LQ4 6.0l out of a 2500HD that had 101k miles before I torn it down.
Block has been washed and the cylinders have been honed
The block also has all new bearings(main and cam)
Crank has been balanced and journals polished
LS2 Rods with new bearings
Federal-Mogul LQ9(flat tops) pistons and rings
Fel-Pro Complete bottom end gasket kit
Texas Speed 228r 588/588 112LSA Cam (Comp Cams)
LS2 timing chain
317 Heads that have been pressure checked, re-surfaced, 3 angle valve job and new valve seats
Comp Cams 918 valve springs
7.400" Chromemoly Hardened pushrods
Everything else that is not listed is what originally came with the motor.
All this motor needs to be 100% complete is acouple top end gaskets, some bolts and spark plugs.
Has all as the accessories (alt., a/c, power steering, pullys)
Comes with the complete wiring harness and the PCM
Engine Cover
Flexplate for 4l80e
Has all of the original emission parts
I am in school and unfortunately do not have the time/money to finish. Looking for this to go as soon as possible. Asking $3000 firm for everything and will sell it as a short/long block also for a reasonable price. BUT WILL NOT sell any of the other parts of the motor untill the block itself has been sold.
PICK UP ONLY! Located in Nottingham, NH. Call Sean for any questions at (603)-686-0269.
2002 LQ4 6.0l out of a 2500HD that had 101k miles before I torn it down.
Block has been washed and the cylinders have been honed
The block also has all new bearings(main and cam)
Crank has been balanced and journals polished
LS2 Rods with new bearings
Federal-Mogul LQ9(flat tops) pistons and rings
Fel-Pro Complete bottom end gasket kit
Texas Speed 228r 588/588 112LSA Cam (Comp Cams)
LS2 timing chain
317 Heads that have been pressure checked, re-surfaced, 3 angle valve job and new valve seats
Comp Cams 918 valve springs
7.400" Chromemoly Hardened pushrods
Everything else that is not listed is what originally came with the motor.
All this motor needs to be 100% complete is acouple top end gaskets, some bolts and spark plugs.
Has all as the accessories (alt., a/c, power steering, pullys)
Comes with the complete wiring harness and the PCM
Engine Cover
Flexplate for 4l80e
Has all of the original emission parts
I am in school and unfortunately do not have the time/money to finish. Looking for this to go as soon as possible. Asking $3000 firm for everything and will sell it as a short/long block also for a reasonable price. BUT WILL NOT sell any of the other parts of the motor untill the block itself has been sold.
PICK UP ONLY! Located in Nottingham, NH. Call Sean for any questions at (603)-686-0269.
03-24-2009, 08:03 PM
#7
TECH Fanatic
iTrader: (14)
Join Date: Nov 2005
Location: South Georgia
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
I would be interested in all the other stuff if they buy the engine. I am trying to do a swap into a 90 model..... need accessories and brackets, harness if its uncut, intake.