6.0, 5.7, 5.3 and other parts
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: Bay Springs, MS
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
6.0, 5.7,5.3 and other parts
Its time to build a 408, so all this has got to go:
6.0-- 22,000 miles, Barker Racing Engines ported 317's, Futral F5 cam 224-228@.50, .588-.576 lift, Complete from intake(stock intake) to oil pan. This is the motor out of my truck it dynoed 391hp 389ftlb ran a best of 12.2@106 on motor ran 11.38@118 on 175 shot. Has about 30 spray passes on it. Looking for $2300 FIRM
5.3-- Original motor from my truck, stock with 110,000 miles runs good, doesnt smoke or knock. Complete from intake to oil pan(oil pan has crack from taking it out and engine hoist letting down too fast) $550 or best offer
5.7-- 68,000 miles, came out of 98 Z28, spun rod bearing, crank will need to be turned and block honed, new rings and bearings. I bought this for a street rod motor, it is complete with wiring harness and computer. SOLD
Also have LS1 timing tuner from ramchargers, was used for about 6 months. $175
GM replacement 4L60E with corvette servo and transgo shift kit, it lost 3rd and 4th gear, had 51,000 miles on it $200 or best offer
1--- 317 6.0 head in good condition $75
I can get pics if ya need them, all motors are out and ready to go. Will try to work with shipping if possible.
6.0-- 22,000 miles, Barker Racing Engines ported 317's, Futral F5 cam 224-228@.50, .588-.576 lift, Complete from intake(stock intake) to oil pan. This is the motor out of my truck it dynoed 391hp 389ftlb ran a best of 12.2@106 on motor ran 11.38@118 on 175 shot. Has about 30 spray passes on it. Looking for $2300 FIRM
5.3-- Original motor from my truck, stock with 110,000 miles runs good, doesnt smoke or knock. Complete from intake to oil pan(oil pan has crack from taking it out and engine hoist letting down too fast) $550 or best offer
5.7-- 68,000 miles, came out of 98 Z28, spun rod bearing, crank will need to be turned and block honed, new rings and bearings. I bought this for a street rod motor, it is complete with wiring harness and computer. SOLD
Also have LS1 timing tuner from ramchargers, was used for about 6 months. $175
GM replacement 4L60E with corvette servo and transgo shift kit, it lost 3rd and 4th gear, had 51,000 miles on it $200 or best offer
1--- 317 6.0 head in good condition $75
I can get pics if ya need them, all motors are out and ready to go. Will try to work with shipping if possible.
Last edited by SPRAYEDSIERRA; 04-26-2007 at 09:59 PM.
#2
TECH Senior Member
iTrader: (79)
Originally Posted by SPRAYEDSIERRA
6.0-- 22,000 miles, Barker Racing Engines ported 317's, Futral F5 cam 224-228@.50, .588-.576 lift, Complete from intake(stock intake) to oil pan. This is the motor out of my truck it dynoed 391hp 389ftlb ran a best of 12.2@106 on motor ran 11.38@118 on 175 shot. Has about 30 spray passes on it. Looking for $2800 or best offer
5.7-- 68,000 miles, came out of 98 Z28, spun rod bearing, crank will need to be turned and block honed, new rings and bearings. I bought this for a street rod motor, it is complete with wiring harness and computer. $800
post them on LS1Tech they'll move in a day
#4
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: Bay Springs, MS
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Motor was purchased from Blacksheep on this board, its supposed to be Lq9 crate motor.
Pics of the 5.7, with the spun rod bearing. I got a newer set of rods and pistons out of a 8,000 mile LS1 so the only thing it will need is turn the crank, bearings and rings.
Pics of the 5.7, with the spun rod bearing. I got a newer set of rods and pistons out of a 8,000 mile LS1 so the only thing it will need is turn the crank, bearings and rings.
Last edited by SPRAYEDSIERRA; 04-08-2007 at 03:37 PM.
Trending Topics
#8
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: Bay Springs, MS
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Im going to buy a digital camera when i get off work, should have pics up tonite. If i dont get any takers on the complete 5.7 with wiring harness, i will sell the wiring harness seperate, but im gonna give it a couple of days before i do that. The 317 6.0 head is 1 head the other was damaged.
Jeremy
Jeremy
#9
TECH Enthusiast
iTrader: (3)
Join Date: Nov 2005
Location: Cabool, Missouri
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPRAYEDSIERRA
If i dont get any takers on the complete 5.7 with wiring harness, i will sell the wiring harness seperate, but im gonna give it a couple of days before i do that.
Jeremy
Jeremy
do you have a starter motor for that 408 yet? trade my stocker plus cash for yours? lmk either way.
#10
Former Vendor
iTrader: (11)
Join Date: Feb 2006
Location: California
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPRAYEDSIERRA
GM replacement 4L60E with corvette servo and transgo shift kit, it lost 3rd and 4th gear, had 51,000 miles on it $200 or best offer