918's w/ ti retainers
#12
Teching In
iTrader: (38)
Join Date: Apr 2006
Location: augusta ga
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lurius
I just had a valve job done on the heads I bought from sunset orange, they tested these springs and they checked out good. Problem is the cam I ended up with will need more, so im installing new double springs. I have one head done now, just need to take the springs and retainers off the 2nd head(tommorow most likely) and they will be ready to ship.
This is only for the springs and titanium retainers.
Looking to get 200 shipped for them. Unknown mileage, but as stated above, they were just checked by machien shop when the valve job was done and they said they are good to use. These springs are rated by mfg to .600" lift.
-Lurius
This is only for the springs and titanium retainers.
Looking to get 200 shipped for them. Unknown mileage, but as stated above, they were just checked by machien shop when the valve job was done and they said they are good to use. These springs are rated by mfg to .600" lift.
-Lurius
Thread
Thread Starter
Forum
Replies
Last Post
kalikid06
Tuning, Diagnostics, Electronics, and Wiring
4
09-20-2015 07:46 PM