94 GMC Sierra GT Black stepside
Bought this truck brand new drove it for about 2 years before I just HAD to modify it.
Since that time I have bored and stroked the stock 350 to a 383 (400 crank). Put in dished Hypereutectic pistons. Have 72cc World Products sportsman 2 heads w/port matched World Products intake. Have purchased a Holley projection kit (900cfm if I remember correctly).
All of the machine work was done by a reputable local machine/race shop. I drove the truck for a while with stock heads and TBI before changing heads and intake and carbureting it. I had problems with my carburetor, so I thought. I then bought the holley projection to put on and realized that the 64cc heads I had were causing too high of compression and I couldn't run the truck on pump gas. I bought the 72cc heads that are on it now. I have never cranked the truck with the new heads. Ithas a brand new B&M 700R4 tranny, and I had just had a powertrax "locker" in the rear end (still has stock 3.42 gears). The truck has been in a couple of scrapes, as I was young when I bought it. It needs a small (very small) amount of body work on the passenger door and the at the right rear of the truck under the tailgate. All in all this truck is in very good shape and has over $5000.00 in the motor and tranny alone. The interior of the truck is still in very good shape. I don't have time to toy with the truck anymore. The engine could be finished with an hour or so of work, but I am tired of fooling with it. I love this truck, but it is just going to rust away if I don't find it a good home or get it running again. This would be a great project truck. I would like to get $5000.00 for it. If you are interested, I can take some pictures and get them posted. I will negotiate. If you see this truck, you will realize $5000.00 is a great deal. Email me if you have any questions.. <img border="0" alt="[USA]" title="" src="graemlins/patriot.gif" />

 

Go ahead and post the pics. Have you tried posting at FSC, and some of the other truck boards?

 

OK, I have to take some pics. It will be a couple of days before I can post them. This is the first board I have posted on.

 

send pics to importfighter02@aol.com i'm very interested if this truck runs and drives well also what is the best time you have gotten out of it?

marc

 

I will have pictures to send to you tomorrow. had problems with downloading the pics for the digital cam I borrow. The truck is not running right now. I took off the carb that I had on it to get it running and I'm putting back on the Holley Projection tommorrow hopefully. If all goes well. Also, a few parts I forgot to mention, the truck also has 1 7/8" hooker jet coated headers, dual chambered flowmaster, a 280H comp cam. (.520/.520) And 1.6 summit roller rockers. It has A/C also, but the cabin electronics wouldn't work last time I cranked it. Sorry I don't have the pics yet, but I should have them by tomorrow. I have to use someone elses flash card port to download the pics.

 

Oh yeah, I haven't had it to the track since I put all of the new equip on it. I was told by the guy who did my machine work, that it should be making a little over 400 hp.