Aeroforce Interceptor,TNT/NX Nitrous Kit, Autometer, Heater
#1
13 Second Truck Club
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
Aeroforce Interceptor,TNT/NX Nitrous Kit, Autometer, Heater
Im getting rid of some parts.
Aeroforce Interceptor Gauge, black face, black trim ring, black display with white letters or can be reversed with white background with black lettering. used about 8 months, perfect condition. $200 shipped. SOLD!
Second from left on top and bottom row.
I have a nitrous kit that was made by TNT, mostly NX parts.
two NX nozzles,
10lb. NX bottle and brackets
nice and heavy NX solenoids, should flow at least 250hp shot
Purge solenoid
15ft.ish mainline
several random lines
Jets ranging from 50-125 shot, about 15 jets
Dyno tune bottle heater, pressure sensor
Bottle blanket
Auto meter Electronic nitrous pressure gauge
HSW switch plate with three switches and purge
$425 shipped
LC1 Wideband used about 5 months
blue face gauge
wideband sensor
The little control box drug the ground and the connector where the o2 plugs in is kind of messed up, I think it could be fixed fairly easy and sealed with RTV.
$100 shipped SOLD!
Aeroforce Interceptor Gauge, black face, black trim ring, black display with white letters or can be reversed with white background with black lettering. used about 8 months, perfect condition. $200 shipped. SOLD!
Second from left on top and bottom row.
I have a nitrous kit that was made by TNT, mostly NX parts.
two NX nozzles,
10lb. NX bottle and brackets
nice and heavy NX solenoids, should flow at least 250hp shot
Purge solenoid
15ft.ish mainline
several random lines
Jets ranging from 50-125 shot, about 15 jets
Dyno tune bottle heater, pressure sensor
Bottle blanket
Auto meter Electronic nitrous pressure gauge
HSW switch plate with three switches and purge
$425 shipped
LC1 Wideband used about 5 months
blue face gauge
wideband sensor
The little control box drug the ground and the connector where the o2 plugs in is kind of messed up, I think it could be fixed fairly easy and sealed with RTV.
$100 shipped SOLD!
Last edited by A Low Dime; 04-26-2010 at 11:50 PM.
#2
#3
13 Second Truck Club
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
Basically, the housing was separated where the yellow wires are, just need some glue/RTV to fix that. The wires on the end have just been sliced and the insulation scraped off. I think its an easy repair if it were on a desk.
#6
13 Second Truck Club
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
Display is dark background with light numbering and vice versa, its reversible. The face is black and the trim ring is also black. I dont know what PT series means. It is the newest one that has the programmable scanning and the two LEDs that can be set as alarms.
#7
13 Second Truck Club
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
Ill also do the dynotune bottle heater with pressure sensor for $50 shipped.
Autometer electric pressure gauge and sensor for $50 shipped.
Without those two parts, Ill do $385 shipped for the rest of the kit.
Autometer electric pressure gauge and sensor for $50 shipped.
Without those two parts, Ill do $385 shipped for the rest of the kit.