I have a set of CNC'd Allpro LS2 style heads. I bought them about 1 1/2 years ago. 250cc intake runner, bronze guides, 7/16 rocker stud holes. Freshly cleaned and milled to ensure true. Came as a 72cc head but is probly closer to 71cc now. Machined to accept T&D shaft mount rockers. The valves I used are 2.08ss intake and 1.60ss exhaust. I bent one of the exhaust valves slightly, did not damage the valve guide. You can pick up an extra from bob at allpro for about 15bucks. Honestly the seats in the heads are on the large side and can accept the 2.125 valve but I was running a 4" bore so had to use smaller. Flow around 340 230@.600. 353 240@.700 2500 w/rockers and valves+shipping




I also have a vic jr purchased about the same time w/rails and crossover fuel line. sold
Set of truck coils with harness's. The tape has been removed from the harness because I was tracking down a electrical problem. Problem was in main wiring harness so all is in good working order. 100+shipping

 

Interested in the intake hit me up

 

sorry intake is sold