Comp cam 212/218 .522 .529 -114
08-20-2011 | 06:46 PM
#1
Thread Starter
TECH Senior Member
iTrader: (79)
Joined: Jun 2002
Posts: 5,175
Likes: 1
From: League City, Tx
Comp cam 212/218 .522 .529 -114
I have a used comp cam for sale - cam only
Specs are 212/218 .522 .529 -114
Cam has 15K miles on it.
This is a great bottom end cam that can be used with the stock torque converter
The cheap yellow LS6 springs can be used with this cam or get a set of the PAC or Comp 918s
works in 4.8, 5.3, 5.7, 6.0, or 6.2 motors
99-present trucks and cars
- SOLD - from 77573
If you don't like my price, make an offer, the worst that I can say is no . . .
Operating Range: 1200-6000 RPM
Duration Advertised: 265° Intake / 271° Exhaust
Duration @ .050'': 212° Intake / 218° Exhaust
Valve Lift w/1.7 Rockers: .522'' Intake / .529'' Exhaust
Lobe Separation Angle:114°
Specs are 212/218 .522 .529 -114
Cam has 15K miles on it.
This is a great bottom end cam that can be used with the stock torque converter
The cheap yellow LS6 springs can be used with this cam or get a set of the PAC or Comp 918s
works in 4.8, 5.3, 5.7, 6.0, or 6.2 motors
99-present trucks and cars
- SOLD - from 77573
If you don't like my price, make an offer, the worst that I can say is no . . .
Operating Range: 1200-6000 RPM
Duration Advertised: 265° Intake / 271° Exhaust
Duration @ .050'': 212° Intake / 218° Exhaust
Valve Lift w/1.7 Rockers: .522'' Intake / .529'' Exhaust
Lobe Separation Angle:114°
Last edited by Tootall; 11-28-2011 at 07:27 PM.
08-22-2011 | 01:16 AM
#3
Bump for a proven cam!
This cam a yank 3000 stall with bolt-ons put my stock geared xcab 5.3 at 13.80@99.5mph with a crappy 2.0 60ft
THIS CAM WORKS!
TOOTALL is an excellent seller i purchased the same a year ago from him!
This cam a yank 3000 stall with bolt-ons put my stock geared xcab 5.3 at 13.80@99.5mph with a crappy 2.0 60ft
THIS CAM WORKS!
TOOTALL is an excellent seller i purchased the same a year ago from him!
08-22-2011 | 01:42 AM
#4
TECH Enthusiast
Joined: Jun 2004
Posts: 527
Likes: 0
ive done just about a complete teardown on my 99 4.8, id hate to leave that weaky squeaky 99 cam in there, being this close. id like to have this cam, if i can use it with stock pushrods.i was planning an ls6 spring swap.im cash poor, and on a limited budget. would you take $225 + shipping. im down in corpus, 78380.
Last edited by slow.8; 08-22-2011 at 01:48 AM.
08-22-2011 | 08:47 AM
#5
Thread Starter
TECH Senior Member
iTrader: (79)
Joined: Jun 2002
Posts: 5,175
Likes: 1
From: League City, Tx
ive done just about a complete teardown on my 99 4.8, id hate to leave that weaky squeaky 99 cam in there, being this close. id like to have this cam, if i can use it with stock pushrods.i was planning an ls6 spring swap.im cash poor, and on a limited budget. would you take $225 + shipping. im down in corpus, 78380.
Push rods depend on heads. . . Stock heads = 7.4s
Trending Topics
09-27-2011 | 11:36 AM
#10
Bump for a GREAT DD cam. I've got it's bigger brother in my RCSB, just kills that acceleration drop off that my (and I believe all stock trucks have) at about 65-70.
0 - 80 with my cam, and other bolt ons, the one Tootall is selling would behave nearly identically. It REALLY wakes the motor up going from a stock cam.
0 - 80 with my cam, and other bolt ons, the one Tootall is selling would behave nearly identically. It REALLY wakes the motor up going from a stock cam.