Fabricated Turbo Hot Side (might work on trucks)
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Fabricated Turbo Hot Side (might work on trucks)
I am selling the fabricated turbo setup off my Caprice as I am changing directions over the winter. The majority of this system sits up top and extends a good way forward, so you will need a chassis with some decent engine bay room if you plan to run it as-is.
Due to placement of the crossover, you will need a taller intake as a car intake will not fit. Truck intake offers good clearance, as does the Edelbrock pro-flo or any carbureted style with a plenum. Holley Hi-rise may work as well, but the mid rise required spacers and throttle body modifications.
The exhaust manifolds are GTO v-banded down to 2.25" The v-bands are quality stainless pieces from Vibrant.
The crossover is 2.25" 409 wrapped up. It has provisions for narrow band o2 sensors. It is T4 flanged and setup for a single Turbonetics RG45 gate which is included. The dump tube off the gate drops straight down and is fabricated from 304 stainless.
I will also include the fender exit downpipe. The downpipe is 3" v-banded at one end, and coned up to 4" diameter tubing. The downpipe is fabricated from 304 stainless as well.
So for manifolds, cross-over, downpipe, waste gate and dump tube I am asking 1300.00 shipped. The turbo is NOT included in the sale price.
1300.00 shipped
Brandon
413-455-9795
Due to placement of the crossover, you will need a taller intake as a car intake will not fit. Truck intake offers good clearance, as does the Edelbrock pro-flo or any carbureted style with a plenum. Holley Hi-rise may work as well, but the mid rise required spacers and throttle body modifications.
The exhaust manifolds are GTO v-banded down to 2.25" The v-bands are quality stainless pieces from Vibrant.
The crossover is 2.25" 409 wrapped up. It has provisions for narrow band o2 sensors. It is T4 flanged and setup for a single Turbonetics RG45 gate which is included. The dump tube off the gate drops straight down and is fabricated from 304 stainless.
I will also include the fender exit downpipe. The downpipe is 3" v-banded at one end, and coned up to 4" diameter tubing. The downpipe is fabricated from 304 stainless as well.
So for manifolds, cross-over, downpipe, waste gate and dump tube I am asking 1300.00 shipped. The turbo is NOT included in the sale price.
1300.00 shipped
Brandon
413-455-9795
Thread
Thread Starter
Forum
Replies
Last Post
5.3lSilverado
GM Engine & Exhaust Performance
25
08-29-2016 12:48 AM