Feeler: Boyd Coddington Timeless 5 wheels
#1
Feeler: Boyd Coddington Timeless 5 wheels
Thinking about selling my wheels off my red truck.
Boyd Coddington Timeless 5 wheels 18x8s on a 5x5 pattern.
Offset is 0mm with a 4" backspacing. They are mounted on 285/50R18 Nitto 404 tires. The tires have about 5-10k left in them before you hit the wear bars(depending on the abuse).
I'm going to ask $1350 plus shipping.
These go for $450 a piece new. The only thing that is wrong is that one of them was bumped when they installed the tires(grrr).
I'm just debating this but let me know if you are interested...don't know for sure if I want to do this because I like the wheels a lot but need a wider wheel for a wider width tire and I want to go 20s for a nicer street look.
Boyd Coddington Timeless 5 wheels 18x8s on a 5x5 pattern.
Offset is 0mm with a 4" backspacing. They are mounted on 285/50R18 Nitto 404 tires. The tires have about 5-10k left in them before you hit the wear bars(depending on the abuse).
I'm going to ask $1350 plus shipping.
These go for $450 a piece new. The only thing that is wrong is that one of them was bumped when they installed the tires(grrr).
I'm just debating this but let me know if you are interested...don't know for sure if I want to do this because I like the wheels a lot but need a wider wheel for a wider width tire and I want to go 20s for a nicer street look.
Last edited by YenkoST; 03-21-2008 at 12:46 AM.
#7
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
That thing would look sick with a 4-6. I am not saying your lying about it being lowered 4 in the back,it is your truck, but from the pic it doesn't look like it, maybe a optical illussion.
John
John
Trending Topics
#9
Yea..trust me, its 4"s(hanger/shackle kit). I have cal-tracs in the rear of the truck to making it sit up a little more than usual. The front is stock but the front end is a little up due to the aluminium heads and lighter engine accessories that I've installed. I'm going to do a 2" in the front and then that will be finished.