FS: 235/239-600/580-113+4 cam
05-21-2007, 02:50 PM
#1
FS: 235/239-600/580-113+4 cam
Only ran it for about 14k miles, in great shape. Too much for my DD. Custom ground by Jones Cam Designs. I have a cam card to go with it.
Price drop, $225 shipped.
Price drop, $225 shipped.
Last edited by thunder550; 06-08-2007 at 11:06 AM.
05-21-2007, 03:53 PM
#3
I don't have any idle clips, unfortunately. It did have some lope to it. I had it idling at either 750 or 775 RPM, can't remember which but it was high enough to not have any idle issues. I'll post up the cam card when I get home later, including the part number.
I just called Jones and they said they use all their own designs, they are all custom. I'm not sure if that answers your question about what the grind was based off of, but he said they buy blanks from some people but the actual cam itself is all custom.
I just called Jones and they said they use all their own designs, they are all custom. I'm not sure if that answers your question about what the grind was based off of, but he said they buy blanks from some people but the actual cam itself is all custom.
05-22-2007, 09:26 PM
#4
Bump.
Cam card info
Jones Cam # HR73353-74341
Rocker Ratio 1.7
Base Circle 1.450"
L/C 113*
Intake C/L 109*
.050" Check @ Lifter
Intake opens 8.5* BTDC
Intake closes 46.5* ABC
Exhaust opens 56.5* BBC
Exhaust closes 2.5* ATDC
Duration @ seat: Intake 292, exhaust 298
Duration @ .050": Intake 235, exhaust 239
Gross camlift: Intake .353", exhaust .341"
Hot valve clearance: Intake .000", exhaust .000"
Net Lift: Intake .600", exhaust .580"
Cam card info
Jones Cam # HR73353-74341
Rocker Ratio 1.7
Base Circle 1.450"
L/C 113*
Intake C/L 109*
.050" Check @ Lifter
Intake opens 8.5* BTDC
Intake closes 46.5* ABC
Exhaust opens 56.5* BBC
Exhaust closes 2.5* ATDC
Duration @ seat: Intake 292, exhaust 298
Duration @ .050": Intake 235, exhaust 239
Gross camlift: Intake .353", exhaust .341"
Hot valve clearance: Intake .000", exhaust .000"
Net Lift: Intake .600", exhaust .580"
06-04-2007, 05:22 PM
#7
Banned
iTrader: (1)
Join Date: Mar 2006
Location: Fort Worth
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
300 is a little high considering it is used. guys are selling used cams similar to your's for ~$225 all day on tech. I realilze you're an individual and can ask whatever you want but just saying. I would give you $210 shipped for it if you're interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
