FS: BN Cam
09-27-2008, 03:38 PM
#1
Import Moderator
Thread Starter
iTrader: (52)
Join Date: Jul 2006
Location: Pittsburgh, PA
Posts: 7,041
Likes: 0
Received 0 Likes
on
0 Posts
FS: BN Cam
This is the same cam TxSilverado's running, ive decided to step up to something a little bigger. This cam is still in the original packaging. I paid $380 so ill start it out at $325 shipped. Thanks for lookin!
Part # 54-000-11 SN#: K 5953-07
ENGINE: LS1 CHEVY LS1/GEN III ’97-UP ROLLER PART# 54-000-11 SERIAL#: K 5953-07
GRIND#: LS1 3732R /3732R HR112.0
SPC INSTR 1:
SPC INSTR 2:
INTAKE EXHAUST
VALVE ADJUSTMENT HYD HYD
GROSS VALVE LIFT .584 .584
DURATION @
.006 TAPPET LIFT 275 275
VALVE TIMINT OPEN CLOSE
@ .050 INT: 5 BTDC 41 ABDC
EX: 49 BBDC 3- ATDC
THESE SPECS ARE FOR CAM INSTALLED
@ 108.0 INTAKE CENTER LINE
INTAKE EXHAUST
DURATION @ .050 226 226
LOBE LIFT .3440 .3440
LOBE SEPARATION 112.0
ENGINE: LS1 CHEVY LS1/GEN III ’97-UP ROLLER PART# 54-000-11 SERIAL#: K 5953-07
GRIND#: LS1 3732R /3732R HR112.0
SPC INSTR 1:
SPC INSTR 2:
INTAKE EXHAUST
VALVE ADJUSTMENT HYD HYD
GROSS VALVE LIFT .584 .584
DURATION @
.006 TAPPET LIFT 275 275
VALVE TIMINT OPEN CLOSE
@ .050 INT: 5 BTDC 41 ABDC
EX: 49 BBDC 3- ATDC
THESE SPECS ARE FOR CAM INSTALLED
@ 108.0 INTAKE CENTER LINE
INTAKE EXHAUST
DURATION @ .050 226 226
LOBE LIFT .3440 .3440
LOBE SEPARATION 112.0
09-29-2008, 02:07 PM
#6
Import Moderator
Thread Starter
iTrader: (52)
Join Date: Jul 2006
Location: Pittsburgh, PA
Posts: 7,041
Likes: 0
Received 0 Likes
on
0 Posts
AP and Stew are both running this cam and have had nothing but good to say about it... and their trucks speak for themselves... this is not a bad cam at all, and if it wont sell in the next few weeks... ill just run it myself
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post