FS: disassembled LS1 in South TX
08-16-2009, 04:34 PM
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Apr 2005
Location: South Padre Island
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
FS: disassembled LS1 in South TX
Ive aquired some LS1 motor parts and i dont have a use for them now. I wanted to build a 347 for my truck but it didnt end up happening. I would rather someone pick them up because shipping everything would be a hassle.
I have a LS1 block out of a 2002 camaro Z28 with complete rotating assembly, two rods need to be cut because they were spun but the crank is out of my 5.3 (melted piston), you can have your choice of heads between 853 LS1 heads or 862 5.3 heads(two springs missing), and you can have your choice between an stock 00 Corvette intae with no EGR or a truck intake with EGR. You can have all that for $400 or for $650 ill throw in a 5.3 iron block with one cylinder scored for a burnt piston, XeSSive motorsports ICR cam 219/224(i bought this new but now has 1000 miles), both sets of heads and both intakes.
I have a LS1 block out of a 2002 camaro Z28 with complete rotating assembly, two rods need to be cut because they were spun but the crank is out of my 5.3 (melted piston), you can have your choice of heads between 853 LS1 heads or 862 5.3 heads(two springs missing), and you can have your choice between an stock 00 Corvette intae with no EGR or a truck intake with EGR. You can have all that for $400 or for $650 ill throw in a 5.3 iron block with one cylinder scored for a burnt piston, XeSSive motorsports ICR cam 219/224(i bought this new but now has 1000 miles), both sets of heads and both intakes.
Last edited by Venomous281; 08-16-2009 at 04:54 PM.
