FS:Fresh LS2/LQ9 6.0 Long Block
#1
Thread Starter
10 Second Truck Club
iTrader: (22)
Joined: Apr 2003
Posts: 812
Likes: 2
From: Whiteville, NC
FS:Fresh LS2/LQ9 6.0 Long Block
This is a brand new LS2 block with a low milage LQ9 rotating assembly which is the same as a LS2 assembly. Low milage 317 heads with LS6 springs are used (rebuilt). Everything has 30k miles or less. Heads have 8k miles. Compression is 10 to 1 and rotating assembly was precision balanced. All tolerances are to factory specs. Cam is a Lunati #55001LUN
212/216 .471/.507 116LSA
New Lowered Price: $3450 with free shipping to lower 48
New parts used:
LS2 block
LS7 lifters
LS6 oil pump
Clevite 77 bearings
Sealed Power plasmamoly rings
LS2 timing gear set
LS2 head gaskets (GM MLS)
GM valve seals
GM head bolts
GM gasket set
212/216 .471/.507 116LSA
New Lowered Price: $3450 with free shipping to lower 48
New parts used:
LS2 block
LS7 lifters
LS6 oil pump
Clevite 77 bearings
Sealed Power plasmamoly rings
LS2 timing gear set
LS2 head gaskets (GM MLS)
GM valve seals
GM head bolts
GM gasket set
Last edited by 67SS509; 11-16-2008 at 07:19 PM. Reason: lowered price.........
#5
I have a 5.3 with heads and cam making @420 fwhp. Im sure the bigger motors would have more torque down low, but I want more power up top too than I have now. Can you help
Trending Topics
#9
Thread Starter
10 Second Truck Club
iTrader: (22)
Joined: Apr 2003
Posts: 812
Likes: 2
From: Whiteville, NC
I can supply a truck intake,TB, MAF, injectors (new 42lbs.), coil packs and plug wires, sensors, water pump, alternator and power steering bracket, a/c bracket, exhaust manifolds, y-pipe with converters, pcm with tune, fan, radiator, hoses, reservoir tank, shroud and the harness. This would be about $1400. The harness would need to be sent to Speartech to make it "plug and play" for you. That would cost approx. $500. This should make you a bolt in and plugin package ready to go.