jfisher

iTrader: (1)

I have complete 5.3 engine out of a 2005 Chevy Silverado 1500. This is the "L33" or HO 5.3 with the Vin B. This engine came out of a rolled truck that ran and drove into the salvage yard before it was pulled. The engine has 104k miles and I still have the receipt from the salvage yard with the trucks VIN number that this engine was removed from.

"The Vortec 5300 L33 (VIN code "B") is an aluminum block version of the LM7, and was referred to as the Vortec 5300 HO in marketing materials. How ever it should be noted that the L33 uses a flat top piston from the 4.8L instead of the standard dish piston found in the LM7. This increased the compression from 9.5:1 to 10.0:1. Also the L33 had a specific camshaft not shared with any other engine, with lobe lift of 7.2 mm, valve timing unknown. As a result power increased by 15 hp (11 kW), to 310 hp (230 kW) and 335 lb·ft (441 N·m). It was only available on extended cab 4WD pickup trucks. Only 25% of trucks made in 2005 had the L33 engine."

This engine also has the 799 casting cylinder heads which were the same casting heads used on the C5 ZO6 Corvettes. It is the same casting as the 243 cylinder head, but with different valvetrain.

Included is:
-5.3 L33 Engine with intake manifold
-Cable and DBW throttle bodies will be included
-Water pump
-Balancer
-Alternator
-Starter
-All sensors that are on the motor and intake manifold
-NO exhaust manifolds

I also still have some of the wiring and fuel lines that were attached to the stock manifold that were cut in some places. I can inlcude if wanted.

$1,300 picked up. I'm sorry but I cannot ship this. I have no means to do so.

jfisher

iTrader: (1)

And pics: