Garage cleanout after LQ4 swap - Lots of 4.8/5.3/6.0 stuff
#1
Garage cleanout after LQ4 swap - Lots of 4.8/5.3/6.0 stuff
So since I'm off to school later this week, my parents decided they wanted use of the second half of their garage back.
All 6.0 parts are off of a 2006 LQ4 with about 25k miles.
All 4.8 parts came off of a running 2000 4.8 with 192k.
PRICES DO NOT INCLUDE SHIPPING.
I am open to all reasonable offers, these prices are just my best estimates as to what these parts are worth.
Drive by wire harness from a 2006 Yukon Denali XL (6.0, 4L65E). I was told by the salvage yard that the harness was un-cut, but there appear to be two ground wires that are cut. I'm not sure where they go to though, the harness in my truck doesn't have them. - $100
Stock LQ4 cam - $50
Stock LQ4 pushrods - $30
Stock LQ4 valve springs - $40
78mm DBW throttle body (from the LQ4) - $70
Stock injectors, and returnless fuel rails - $30 for the injectors, $25 for the rails, $50 for both. Injectors have been capped since they came off of the engine.
Not pictured are the stock 4.8 injectors (with 192k) - $20
Oil cooler lines from the 6.0 with the used gasket - $30
Coils off of the 4.8, work perfectly. SOLD
Alt/PS bracket - $50
NAPA water pump with about 15k-20k on it, works perfectly - SOLD
Old square style Vortec engine cover, with the bracket that the throttle cable clips into, and that holds the harness to the inake - $10
A/C comp bracket. Tensioner needs to be replaced. - $10
All 6.0 parts are off of a 2006 LQ4 with about 25k miles.
All 4.8 parts came off of a running 2000 4.8 with 192k.
PRICES DO NOT INCLUDE SHIPPING.
I am open to all reasonable offers, these prices are just my best estimates as to what these parts are worth.
Drive by wire harness from a 2006 Yukon Denali XL (6.0, 4L65E). I was told by the salvage yard that the harness was un-cut, but there appear to be two ground wires that are cut. I'm not sure where they go to though, the harness in my truck doesn't have them. - $100
Stock LQ4 cam - $50
Stock LQ4 pushrods - $30
Stock LQ4 valve springs - $40
78mm DBW throttle body (from the LQ4) - $70
Stock injectors, and returnless fuel rails - $30 for the injectors, $25 for the rails, $50 for both. Injectors have been capped since they came off of the engine.
Not pictured are the stock 4.8 injectors (with 192k) - $20
Oil cooler lines from the 6.0 with the used gasket - $30
Coils off of the 4.8, work perfectly. SOLD
Alt/PS bracket - $50
NAPA water pump with about 15k-20k on it, works perfectly - SOLD
Old square style Vortec engine cover, with the bracket that the throttle cable clips into, and that holds the harness to the inake - $10
A/C comp bracket. Tensioner needs to be replaced. - $10
Last edited by DV2000NJ; 08-23-2010 at 04:51 PM.
#2
Stock 6.0 exhaust manifolds. One stud was cut by the junkyard that I got the engine from. Easy enough to replace with a bolt. - SOLD
Stock 4.8 exhaust manifolds with EGR - $40
Stock 4.8 crank pulley - SOLD
Engine mounts from the 4.8 - $15
Stock green keys (will "lift" the HD trucks) - SOLD
4.8 intake manifold. I robbed two of the brass fittings that the fuel rails bolt to, and the clips that hold in the MAP sensor are broken. - FREE, you pay shipping
This little thing that goes behind the fuel rail - FREE, you pay shipping
Stock 4.8 converter with 192k - $20
Brand new Summit 3" cutout, NOT stainless - $25
Again, all prices are OBO, and none include shipping. Any questions, feel free to ask, and thanks for looking.
Stock 4.8 exhaust manifolds with EGR - $40
Stock 4.8 crank pulley - SOLD
Engine mounts from the 4.8 - $15
Stock green keys (will "lift" the HD trucks) - SOLD
4.8 intake manifold. I robbed two of the brass fittings that the fuel rails bolt to, and the clips that hold in the MAP sensor are broken. - FREE, you pay shipping
This little thing that goes behind the fuel rail - FREE, you pay shipping
Stock 4.8 converter with 192k - $20
Brand new Summit 3" cutout, NOT stainless - $25
Again, all prices are OBO, and none include shipping. Any questions, feel free to ask, and thanks for looking.
Last edited by DV2000NJ; 08-23-2010 at 04:51 PM.