vicalma03

iTrader: (8)

I've been slowly taking my truck apart and here are the next items up for graps. All these parts are pretty much new and motor has less then 800 miles on it. Looking to trade for a nice low milage 6.0, 6.2 and trans + cash or ls2 and trans + cash or sell out right for $5500. Send me some pms with what you guys have. Lets make a deal. You will get everything that is listed. Basicaly a complete 408 long block. It is a low compression motor 8.5:1




Quick list of whats in this motor. It was built to hold 1000+hp and is very solid.

Engine components:

New 6.0 Block
Scat 4340 LS1 4.000 crank 24 tooth reluctor
Eagle LS1 H-Beam Rods 6.125 Long
Wiseco K396F3 LS1 32cc Pistons 4.030 Bore
1/16,1/16,3.0mm Rings 1.115 Comp. Height
Wiseco Custom Pins 9310 Tool Steel .200 wall 100.00 100.00T
Speed Pro Hell-Fire Rings #R1910035 1/16,1/16,3/16
4.035 bore Power Adder - 1000 RWHP
Federal Mogul 152M1X 3/4 Groove Main Bearings for LS1 Coated
ACL CB 663 H Rod Bearings for 2.100 SBC Chamfered Race Bearings Coated
ARP 234-5608 ARP 234-5608 Main Studs
GM Engine Block Plugs
Custom HKE Cam 236 / 236 115+3
ARP 134-1003 ARP 134-1003 Cam Bolts for LS1
GM 1258-901... GM 1258-9016 LS1 Cam Plate
ARP 134-1002 ARP 134-1002 Cam Retainer Plate Bolts for LS1
N-Motion LS2... N-Motion LS1 Double Roller Timing Chain
GM 1249-922... GM 1249-9225 LS7 HR Lifters
TFS 5/16 Pus... TFS 5/16 Pushrods[/COLOR][/COLOR][/COLOR]Stage 3 Ported and polished 317

Patriot X-Tre... Patriot X-Treme Gold Spring Package for LS1s
Ferrea LS1 Super Alloy replacement exhaust valves F1894P (1.550 Diameter?)
ARP 234-4317 Head Studs for LS1 (new style 6.0 block with equal head stud length)
GM 6.2 MLS ... GM 6.2 MLS Head Gaskets

skeet

iTrader: (18)

to damn sweet!! good luck bud, if i wasnt deep into NA we would be talking

vicalma03

iTrader: (8)

Thanks, I'm building a shop at my home so my hobby has to go.

Deuce

iTrader: (1)

What does that chassis fit??

Runwhatchabrung

iTrader: (2)

you get the teflon lines with that fuel system?

vicalma03

iTrader: (8)

Its for any 99-07classic Silverado or Sierra reg cab
There not braided. I tried looking on his site but it doesn't say. Its black and steel lined. Kind of like hydraulic hose. It has push on an fittings thought and quick connect an fittings on the pump.

Runwhatchabrung

iTrader: (2)

assuming your including the sending unit with the pumps right?

vicalma03

iTrader: (8)

Yup!! Sending unit comes with the pumps, all ready to go

5150hammer

Im very interested in your motor wondering if you still have the transmission also please shoot me an email when you get a chance hankctu@hotmail.com thanks in advance

89LS1FOXER

iTrader: (47)

sucks your parting this man.... always liked your truck!