Kb turbo kit, Borg Warner, on3, Devils Own meth, etc.
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Jul 2009
Location: Monticello,MS
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
Kb turbo kit, Borg Warner, on3, Devils Own meth, etc.
Alright guys I hate to do it but I am going back Na. Gonna have a lot to sell. Willing to separate certain parts of the kit and prices are OBO.
1. Kb racing front mount turbo hot pipes. Includes mild steel log manifold and the cross over has been modified for 2 40mm waste gates for more control. 2 jgs wastegates vent to atmosphere. And a 4" mandrel bent 2 pc down pipe made for a Borg Warner s400 turbo. Comes with nessesary v bands. Also comes with a -4 oil feed line. SOLD!!!!
2. Borg Warner s400 sx3 built by Reed at works turbochargers. 76mm compressor/87-81mm turbine with t4 1.10 ar. Comes with oil drain flange with 3/4 hose barb end and -4 90* feed fitting. VERY little run time with this turbo.
SOLD!!!!
3. On3 76 mm .96 ar turbo (SOLD!) rs/ss 4.8
4. Turbo cold side. eBay 31x11.5x3 intercooler. all 3" pipes to and from intercooler to mount the cooler behind the grill of a 99-02 truck. The last bend to the throttle body was made by kb. Has a 50mm rps bov and 2 tapped holes for meth nozzles. Also has a 7psi Hobbs switch installed. Includes all silicon couplers and t bolt clamps needed. SOLD!!!!!
4. Devils own dual nozzle methanol kit. Comes with a 4 different nozzles, lines, controller, and pump. I used the stock washer fluid tank. SOLD!!!!!
5. Msd 2 step. SOLD!!!!!
6. Hallman manual boost controller. (SOLD!!!) rs/ss 4.8
7. Air intake for big race cover Borg Warner's. 5.5-6" 90* with giant 6" opening spectre filter in good condition
SOLD!!!!
Ill cut a better deal for anyone wanting the full kit and prices listed are + shipping and obo... All parts are still on my truck as if now.
1. Kb racing front mount turbo hot pipes. Includes mild steel log manifold and the cross over has been modified for 2 40mm waste gates for more control. 2 jgs wastegates vent to atmosphere. And a 4" mandrel bent 2 pc down pipe made for a Borg Warner s400 turbo. Comes with nessesary v bands. Also comes with a -4 oil feed line. SOLD!!!!
2. Borg Warner s400 sx3 built by Reed at works turbochargers. 76mm compressor/87-81mm turbine with t4 1.10 ar. Comes with oil drain flange with 3/4 hose barb end and -4 90* feed fitting. VERY little run time with this turbo.
SOLD!!!!
3. On3 76 mm .96 ar turbo (SOLD!) rs/ss 4.8
4. Turbo cold side. eBay 31x11.5x3 intercooler. all 3" pipes to and from intercooler to mount the cooler behind the grill of a 99-02 truck. The last bend to the throttle body was made by kb. Has a 50mm rps bov and 2 tapped holes for meth nozzles. Also has a 7psi Hobbs switch installed. Includes all silicon couplers and t bolt clamps needed. SOLD!!!!!
4. Devils own dual nozzle methanol kit. Comes with a 4 different nozzles, lines, controller, and pump. I used the stock washer fluid tank. SOLD!!!!!
5. Msd 2 step. SOLD!!!!!
6. Hallman manual boost controller. (SOLD!!!) rs/ss 4.8
7. Air intake for big race cover Borg Warner's. 5.5-6" 90* with giant 6" opening spectre filter in good condition
SOLD!!!!
Ill cut a better deal for anyone wanting the full kit and prices listed are + shipping and obo... All parts are still on my truck as if now.
Last edited by lglowe; 03-13-2013 at 10:32 AM. Reason: Everything sold!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
5.3lSilverado
GM Engine & Exhaust Performance
25
08-29-2016 12:48 AM