Petraszewsky

iTrader: (28)

Low Mileage 2005 LS2 stock cam for sale: Cam specs are the same as the 01 Z06 Cam. $100 shipped

Duration at .050" Tappet Lift
Intake 204 Degrees
Exhaust 211 Degrees

Lift with a 1.7 Rocker (Stock LS2) is .525/.525
Intake Centerline 118 Degrees
Exhaust Centerline 114 Degrees
LSA 116 Degrees

~Stock LS2 rockers and pedestals $60

~GTO Power Steering Resevoir Mounting Bracket and Spacer $30

~WTB/WTT....Detroit TrueTrac for 8.5" spline rear...GM 8.5" Differential cover something similar to a TA , JEGS , SUMMIT cover....Not a weak chrome differential cover....

Petraszewsky

iTrader: (28)

Maybe a 5.3 guy wants this?

nighthawk08

this cam would require a lot of extra parts to make it work in a Gen 3 engine.

Petraszewsky

iTrader: (28)

Explain????

nighthawk08

Gen 3 engines have the cam sensor built into the rear of the cam. To use this camshaft, that doesn't have the cam sensor built in, you would need to convert to a front cam sensor which would require wiring changes, the front timing cover, cam sensor and the LS2 sprocket.

Petraszewsky

iTrader: (28)

Then how about a GEN IV 5.3?? Or someone building a stock motor??? I dunno I just don't need it anymore....haha

S.K.C.ColorEyez

I have the same cam and its true
not installed yet
you also need ls6 springs
the timing cover and cam sprocket should get out
of an 05 corvette
its expensive about 700 buks for parts and labor
cam sprocket and timing cover 200
ls6 springs 150
labor 300
retune 50
plus cam was 120
but my friend has the same cam and he runs low 13s with
lts,tune,intake

Petraszewsky

iTrader: (28)

Well , I've got a 1x cam sprocket with crank sprocket and LS2 chain I'll sell with it and a timing cover also with sensor... $65 LS2 chain setup , $50?? timing cover...

S.K.C.ColorEyez

is it used
or new
cause the stuff i was getting is new
but might be interstead

Petraszewsky

iTrader: (28)

It's used...I painted the timing cover and the cam sensor has a small spot on it where it melted but it's useable....Just trying whatever it takes to get rid of the cam...