When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Manley Pro-Series I-beam 300m LS rods 6.200 w/ARP 625 bolts
Bought these from a member on ls1tech many moons ago. Needed two new rods (one spun a bearing and both rods on same journal had heat marks in them) and Manley went completely through the entire set.
Build a long rod stock stroke with a 1.229 Pin height or less piston to remain at zero deck height. Something like a Wiseco 3.900 stroke piston at your desired bore/compression ratio.
.200'' (+.500) Center-to-Center 2.100'' Crankshaft Journal Size (Large) 2.225'' Big End Bore 0.9281'' Piston Pin Bore 7/16'' ARP Custom Age 625+ Cap Screws 655 Grams
Yes the label says ARP2000 and that is not the case, the Manley rep said he could not print the original label correctly but you can clearly see ARP 625.
01-16-2022, 01:51 PM
Manley Pro-Series I-beam 300m LS rods 6.200 w/ARP 625 bolts
