I have a slighty used P1 supercharger kit for a 97-11' trucks. The kit is orignally of a 06' I modified the piping and added a 24x12x4" front mount. The horizontal IC was not cutting it. IAT's were about 60-80* over ambient in the shop on the dyno. that was with the fan blowing on it. I upgraded the piping and IC and the truck was able to get retuned to add more timing and ambient temps were down for 20* and it made 501/478 on a dynojet AWD 6.2L I took the kit off as it was just going to keep running the wallet dry. I was running out of fuel pump and did not want to upgrade. The kit is complete no issues. I have the orginal piping that came from procharger and the new aluminum hard piping. Hard piping has area to accept 2010' 6.2L truck MAF sensor. 52# injectors are included. standard pulley made 9# on my truck with hard piping. t bolt clamps. Tial BOV on hard piping

$3750.00 shipped, obo

Jeff