Power Slot 14" rotor kit
07-26-2010, 03:16 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Jul 2005
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Power Slot 14" rotor kit
*SOLD* I have a brand new Power Slot 14" front rotor kit that contains 2 - 14" slotted rotors and caliper brackets. $300 plus shipping. Part #29-8690 *SOLD*
Last edited by Dezert1500; 07-28-2010 at 05:43 PM.
nice pic
07-26-2010, 07:40 PM
#4
Pic looks familiar.
Can I ask you to do me a favor?
Take out a powerslot rotor and lay it on the floor. Measure the height of the hat from the floor to the top from the inside, and give me that dimension. Also please measure the total thickness of the friction surface and let me know that...should be something a bit less than 2 inches.
I'm asking for this info so I can compare them to my baer rotors and see if they would be a suitable replacement that fits the baer calipers and brackets.
Thanks in advance.
Can I ask you to do me a favor?
Take out a powerslot rotor and lay it on the floor. Measure the height of the hat from the floor to the top from the inside, and give me that dimension. Also please measure the total thickness of the friction surface and let me know that...should be something a bit less than 2 inches.
I'm asking for this info so I can compare them to my baer rotors and see if they would be a suitable replacement that fits the baer calipers and brackets.
Thanks in advance.
07-26-2010, 10:02 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Jul 2005
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
They are a direct bolt and will work with stock calipers. They have a bracket that allows you to use the stock calipers.
Atomic thanks for the pic ha. I saw your post earlier and remembered I had this kit lying around so figured I'd put it up for sale since I'm no longer using it.
I'll get those measurements tomorrow.
Atomic thanks for the pic ha. I saw your post earlier and remembered I had this kit lying around so figured I'd put it up for sale since I'm no longer using it.
I'll get those measurements tomorrow.
07-27-2010, 02:32 PM
#7
Thank you. It doesnt look like they are anywhere close to the same dimensions as the baer and ssbc rotors. My guess is these would only work with the powerslot supplied brackets.
Still a great deal for someone looking for a cheap brake upgrade without buying a $1000-2000 kit. Since they use stock calipers you don't have to open your system and take the chance of getting air into the ABS unit, which is bound to happen when you change to bigger calipers.
Still a great deal for someone looking for a cheap brake upgrade without buying a $1000-2000 kit. Since they use stock calipers you don't have to open your system and take the chance of getting air into the ABS unit, which is bound to happen when you change to bigger calipers.
