Preston129 Parts Sale Thread
#1
Preston129 Parts Sale Thread
I've got way too much stuff sitting around, so I'd like to free up some space and money for other projects.
I'll likely just keep adding new posts with new stuff since I've got a few things but no pictures of them yet.
I also realize most items don't have prices, and in the coming days as I think about fair pricing I'll add them as I go. I'm negotiable on most things but shipping's gonna be expensive on some things to get from me (in canada) to you, likely in the states. Some things I can drive across the border to ship at a lower cost, but not everything's going to be worth my while to do so.
Engine parts
EPS cam for N/A - $400
219/227, .595/.598, 113+3
45° of overlap, so it will cut up nicely on a ~750 RPM idle.
Comp valvetrain parts for beehive springs:
Tool steel retainers: These are almost as light as Ti but cost less than half as much
Shim kit
Comp Hi-Tech 7.350" hardened pushrods:
Single bolt cam gear for Gen IV engines. I've also got the AFM parts if someone wants to save a ton of money on fuel economy :tongue:
K&N 57-3058 CAI kit (intake tube, airbox and filter) - $200
This will also fit an '07-08 4.8, 5.3 and 6.0.
Exhaust parts:
factory Y-pipe (cut)
Cat back exhaust for 07-08 MY-GMT900 crew cabs (can easily be adapted to fit '09+ as well as RC and EC layouts). All hangers and clamps included. 2 years and maybe 1000 miles worth of use so it's practically new, don't let the surface oxidation fool you:
Gibson 65628 - $350
This will fit an '07-08 GMT900 CC and EC. It's an 18" SI/DO muffler and exits at an angle behind each rear wheel. Loved the sound of it; was a nice deep growl.
Cut factory y-pipe
Appearance parts:
1500 grille:
I have the stock chrome one with a billet bowtie emblem:
I also have Recon smoked tails and third brake light, T-rex Sport Mesh inserts for the silverado grille, two '07 bumper bars with light damage and the textured licence plate valance. I'll post pics whenever I get around to taking them, probably on the weekend.
Lettering and rear bowtie
I've got the rear bowtie:
Suspension parts
I have the stock spindles and rear blocks if someone wants them.
New items for sale
41U painted handles (for crew cab) and mirror caps. These aren't perfect and will require a repaint if you want like-new condition. $130 OBO.
I have 2 bumper bars without the hole, painted black 41U. Both have a bit of damage.
I'll likely just keep adding new posts with new stuff since I've got a few things but no pictures of them yet.
I also realize most items don't have prices, and in the coming days as I think about fair pricing I'll add them as I go. I'm negotiable on most things but shipping's gonna be expensive on some things to get from me (in canada) to you, likely in the states. Some things I can drive across the border to ship at a lower cost, but not everything's going to be worth my while to do so.
Engine parts
EPS cam for N/A - $400
219/227, .595/.598, 113+3
45° of overlap, so it will cut up nicely on a ~750 RPM idle.
Comp valvetrain parts for beehive springs:
Tool steel retainers: These are almost as light as Ti but cost less than half as much
Shim kit
Comp Hi-Tech 7.350" hardened pushrods:
Single bolt cam gear for Gen IV engines. I've also got the AFM parts if someone wants to save a ton of money on fuel economy :tongue:
K&N 57-3058 CAI kit (intake tube, airbox and filter) - $200
This will also fit an '07-08 4.8, 5.3 and 6.0.
Exhaust parts:
factory Y-pipe (cut)
Cat back exhaust for 07-08 MY-GMT900 crew cabs (can easily be adapted to fit '09+ as well as RC and EC layouts). All hangers and clamps included. 2 years and maybe 1000 miles worth of use so it's practically new, don't let the surface oxidation fool you:
Gibson 65628 - $350
This will fit an '07-08 GMT900 CC and EC. It's an 18" SI/DO muffler and exits at an angle behind each rear wheel. Loved the sound of it; was a nice deep growl.
Cut factory y-pipe
Appearance parts:
1500 grille:
I have the stock chrome one with a billet bowtie emblem:
I also have Recon smoked tails and third brake light, T-rex Sport Mesh inserts for the silverado grille, two '07 bumper bars with light damage and the textured licence plate valance. I'll post pics whenever I get around to taking them, probably on the weekend.
Lettering and rear bowtie
I've got the rear bowtie:
Suspension parts
I have the stock spindles and rear blocks if someone wants them.
New items for sale
41U painted handles (for crew cab) and mirror caps. These aren't perfect and will require a repaint if you want like-new condition. $130 OBO.
I have 2 bumper bars without the hole, painted black 41U. Both have a bit of damage.
Last edited by Preston129; 01-27-2012 at 10:07 AM.
#4
Nope, just forgot to post the prices. For most of the little stuff, I'll sell for:
$100 for the headbolts
$10 for the cam bolts
$20 for shims, they are for beehives
$100 for the pushrods
$40 for head gaskets
About $200 for the tail lights (maybe a bit more if shipping is high)
Grille is about $270
Cat back will be about 435 ish, which I know will cost me a bunch to ship.
Anything I missed I'm happy to discuss!
This is just all the N/A parts I bought before I decided about halfway through buying everything that I should go F/I instead
$100 for the headbolts
$10 for the cam bolts
$20 for shims, they are for beehives
$100 for the pushrods
$40 for head gaskets
About $200 for the tail lights (maybe a bit more if shipping is high)
Grille is about $270
Cat back will be about 435 ish, which I know will cost me a bunch to ship.
Anything I missed I'm happy to discuss!
This is just all the N/A parts I bought before I decided about halfway through buying everything that I should go F/I instead