race parts
01-13-2010, 03:43 PM
#11
12 Second Club
iTrader: (46)
Join Date: Feb 2003
Location: Virginia Beach, VA
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
The cog kit is designed around the f-body balancer. You would need an ATI balancer f-body style. I think it would still work with the truck balancer but it would still have to be an ATI balancer so the crank cog pulley can bolt to it. I relocated my computer under the battery but the bracket has a lot of postions it can be configured to so that may not be necesary.
The blower does lay on its side in this bracket so the headunit will have to be reclocked. A lot of people do this themselves, there are a lot of writeups online on how to do it. I sent my headunit back to procharger to have it done, it was 255 for them to reclock it and inspect the internals. Took about a week in all to have them do it and send it back. As far as the volute goes, you can turn it around to whatever position works best for you.
MGMC, I will get pics of the snow kit for you tomorow, I am in the middle of pulling all this stuff off the truck. I have been deployed and just got back so I am in the tear down phase right now. Thanks.
The blower does lay on its side in this bracket so the headunit will have to be reclocked. A lot of people do this themselves, there are a lot of writeups online on how to do it. I sent my headunit back to procharger to have it done, it was 255 for them to reclock it and inspect the internals. Took about a week in all to have them do it and send it back. As far as the volute goes, you can turn it around to whatever position works best for you.
MGMC, I will get pics of the snow kit for you tomorow, I am in the middle of pulling all this stuff off the truck. I have been deployed and just got back so I am in the tear down phase right now. Thanks.
-mike
01-13-2010, 04:08 PM
#12
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Thanks for the quick answer. I am going to pass, I have a perfect 8 rib set up I will try, but have always wanted the cog. Just a lil to much work for me to do at this point.. Good luck on the sale thow.. 
01-14-2010, 11:13 AM
#19
TECH Enthusiast
Thread Starter
iTrader: (21)
Join Date: Mar 2003
Location: San Antonio Tx
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of the snow kit. It has all three sizes of nozzles as well. 225, 325, 625
thanks
thanks
Last edited by jasond26; 01-14-2010 at 11:15 AM. Reason: update