Rings, Compressor, Hone+Brush / Complete Re-ring kit! LQ4/9
06-27-2013, 07:38 AM
#1
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Mar 2006
Location: West Chester, PA
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
4.000" Tapered Ring Compressor, Ball Hone+Brush
Hey all! Its finally time to get rid of some of my left over goodies from my build.
Im trying to sell this all together since it goes together. But Im going to list everything individually, then give a package price.
Also, Im PRETTY sure that this all works for an LQ9 as well, but it was all purchased for an LQ4.
1) Rings - Sealed Power Plasma-Moly ring set. Std. bore. Part # ZE921K. These are brand new. I opened the box to take a measurement off one of the rings, but other than that they havent been out of the box. I could take a picture of all of them, but figured it wasnt necessary. SOLD!!
2) Ring Compressor - ARP 4.000" bore taped ring compressor. THIS THING ROCKS! Its easily the best ring compressor Ive ever used, and will never go back to anything else. It makes popping the pistons in effortless. You can just use your thumbs. I almost want to keep it...but if I have to rebuild this motor any time soon Im going to push the car off a cliff. And i might just sit in it for the ride down haha. SOLD!!
3) Ball hone - Affectionatly known as the dingle ball hone haha. Its a 4" (101mm), 400 grit, silicon carbide flex hone. I used it one time. Very few passes on each cylinder bore with 10w30. All the ***** are in great shape, and there should be PLENTY of life left on this hone. I used it to deglaze my cylinders. Its very easy to use, and unless you go insane while using it, its hard to mess up. The LQ4 manual even shows using it. Its was difficult to find it in this grit and size. You'll be hard pressed to find it for a better price than Im offering! SOLD!!
4) 4" nylon brush. This is for washing out the cylidners after you hone them. Hot soapy water + this brush, followed by ATF/brake cleaner/ATF/Cleaner/etc, and your cylinders will look brand new. SOLD!!
If you want it all together, SOLD!!
The reason I have "+shipping" on the individual sales is I dont want to take a complete bath with shipping. It also helps you especially if you are local..instead of me putting a blanket shipping cost on everything. I will likely check actual shipping, then adjust the price a bit and keep it a good deal for you. I will get shipping as cheap as possible...
The package deal is a GREAT deal if you want it all. Check online pricing with shipping, and you'll be way over that.
Obviously Ill entertain offers as well. Ide really love to sell it all together.
Here are the pictures:
All of this stuff is located in my trunk haha. My trunk can either be in West Chester, PA during the week or Norristown, PA during the evening and weekends..in case you want to pick up.
Thanks!
Justin
Im trying to sell this all together since it goes together. But Im going to list everything individually, then give a package price.
Also, Im PRETTY sure that this all works for an LQ9 as well, but it was all purchased for an LQ4.
1) Rings - Sealed Power Plasma-Moly ring set. Std. bore. Part # ZE921K. These are brand new. I opened the box to take a measurement off one of the rings, but other than that they havent been out of the box. I could take a picture of all of them, but figured it wasnt necessary. SOLD!!
2) Ring Compressor - ARP 4.000" bore taped ring compressor. THIS THING ROCKS! Its easily the best ring compressor Ive ever used, and will never go back to anything else. It makes popping the pistons in effortless. You can just use your thumbs. I almost want to keep it...but if I have to rebuild this motor any time soon Im going to push the car off a cliff. And i might just sit in it for the ride down haha. SOLD!!
3) Ball hone - Affectionatly known as the dingle ball hone haha. Its a 4" (101mm), 400 grit, silicon carbide flex hone. I used it one time. Very few passes on each cylinder bore with 10w30. All the ***** are in great shape, and there should be PLENTY of life left on this hone. I used it to deglaze my cylinders. Its very easy to use, and unless you go insane while using it, its hard to mess up. The LQ4 manual even shows using it. Its was difficult to find it in this grit and size. You'll be hard pressed to find it for a better price than Im offering! SOLD!!
4) 4" nylon brush. This is for washing out the cylidners after you hone them. Hot soapy water + this brush, followed by ATF/brake cleaner/ATF/Cleaner/etc, and your cylinders will look brand new. SOLD!!
If you want it all together, SOLD!!
The reason I have "+shipping" on the individual sales is I dont want to take a complete bath with shipping. It also helps you especially if you are local..instead of me putting a blanket shipping cost on everything. I will likely check actual shipping, then adjust the price a bit and keep it a good deal for you. I will get shipping as cheap as possible...
The package deal is a GREAT deal if you want it all. Check online pricing with shipping, and you'll be way over that.
Obviously Ill entertain offers as well. Ide really love to sell it all together.
Here are the pictures:
All of this stuff is located in my trunk haha. My trunk can either be in West Chester, PA during the week or Norristown, PA during the evening and weekends..in case you want to pick up.
Thanks!
Justin
Last edited by ghettocruiser; 01-20-2015 at 01:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TX Tahoe Z71
GMT 800 & Older GM General Discussion
9
09-01-2015 09:11 PM
Dezert1500
GM Parts Classifieds
5
07-30-2015 02:51 PM
