TOG headers for the 4.8/5.3 Silverado, Sierra, Suburban, Yukon (A.I.R.)
#1
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
TOG headers for the 4.8/5.3 Silverado, Sierra, Suburban, Yukon (A.I.R.)
We have one set of discounted TOG headers available -
580022C 2001-'04 4.8, 5.3 Silverado, Sierra, Suburban, Yukon (A.I.R.) - regular price is $759.99. This set can go for $625.
The Other Guys mid-length headers are manufactured to the industry’s highest standards. There are no compromises in material and workmanship.
14-gauge mild steel
Electroless-nickel-plated
Titanium-thermal-barrier-ceramic
Corrosion and heat resistant
1/2” thick precision-cut flanges
50-state legal
Gain of up to 43 horsepower
California Air Resources Board (CARB) Exemption No. D-509
Exhaust flanges are made from beefy 1/2" thick steel plate (50–100% thicker than most others) and ground flat.
Thick 14-gauge tubing is used instead of ordinary 16 or 18-gauge. Tubes are precision TIG welded to the flange.
A.I.R. refers to factory installed air pump emissions systems.
A special Electroless nickel plating is used inside and out. This is twice as durable as stainless steel. These headers are so well built, they’re backed by an un-limited lifetime warranty.
Tom
580022C 2001-'04 4.8, 5.3 Silverado, Sierra, Suburban, Yukon (A.I.R.) - regular price is $759.99. This set can go for $625.
The Other Guys mid-length headers are manufactured to the industry’s highest standards. There are no compromises in material and workmanship.
14-gauge mild steel
Electroless-nickel-plated
Titanium-thermal-barrier-ceramic
Corrosion and heat resistant
1/2” thick precision-cut flanges
50-state legal
Gain of up to 43 horsepower
California Air Resources Board (CARB) Exemption No. D-509
Exhaust flanges are made from beefy 1/2" thick steel plate (50–100% thicker than most others) and ground flat.
Thick 14-gauge tubing is used instead of ordinary 16 or 18-gauge. Tubes are precision TIG welded to the flange.
A.I.R. refers to factory installed air pump emissions systems.
A special Electroless nickel plating is used inside and out. This is twice as durable as stainless steel. These headers are so well built, they’re backed by an un-limited lifetime warranty.
Tom
#2
TECH Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: Armpit of East TX
Posts: 9,342
Likes: 0
Received 0 Likes
on
0 Posts
I know someone from the FSC board was looking for a set, or thinking about them anyways. I PM'ed him a copy of this thread.
Why the discount? Someone back out on a set?
Why the discount? Someone back out on a set?
#4
TECH Senior Member
iTrader: (10)
Join Date: Nov 2001
Location: Gainesville, Denton TX
Posts: 8,768
Likes: 0
Received 0 Likes
on
0 Posts
Would I have to block off the air part or do i have it? Don't think I do.... is it jus for cali trucks?
Also do they have the optional coating that is usually 150? will they rust if i dont get it?
Tom I'm going to order headers this week. Probably friday, if you still have them email me. Ill send you a pm too
Also do they have the optional coating that is usually 150? will they rust if i dont get it?
Tom I'm going to order headers this week. Probably friday, if you still have them email me. Ill send you a pm too
Trending Topics
#10
13 Second Truck Club
iTrader: (1)
Join Date: Mar 2003
Location: Pueblo de Nuestra Señora la Reina de los Ángeles de la Porciúncula
Posts: 4,094
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by tbyrne
Still available!
So someone just bought em and didn't want em?
Never installed, etc?
Any imperfections after getting them back?
Does that $625 include shipping?