truck engine parts, spal fan, car intake adapter bracket
#1
truck engine parts, spal fan, car intake adapter bracket
set of 16) valve springs from a ZERO MILE 04 LQ4 crate motor. $30 shipped
Stock LQ4 cam from the same zero mile crate motor $45 shipped. (no pics as it is holding the lifters up in my LS6 right now until my big cam comes in the mail tomorrow)
set of 16) stock pushrods. They are actually aftermarket (sealed power) stock replacements. They have about 34k miles on them. $25 shipped
hydroboost pressure hose from ps pump to hydrboost pump. Removed from an 02 escalade. Tested no leaks. $20 shipped.
custom made bracket to use car intake on truck motor. When using the car intake the throttlebody hits the alt/ps bracket where the idler pulley is so you have to cut it off. This bracket goes on that big bracket and gives you a place to relocate the idler pulley to. I powdercoated it flat black. $50 shipped.
stock alt/ps bracket with idler pulley. No problems. I can powdercoat this if you want for a little extra. I can also modify it for a car intake as mentioned above. $45 shipped.
Set of truck motor mounts from my 02 denali, 120k, no issues that I know of. I painted them black a couple years back. $25 shipped (they are actually kind of heavy so shipping will be about $15 for me).
USED felpro intake gaskets for 00-06 truck intake. About 35k miles I'd guess. They look fine and reuseable to me. New cost is $40. $15 shipped.
Truck motor oil filler tube with cap $10 shipped.
Truck oil pan with pickup and windage tray. Little dirty but no known cracks or problems. I can clean it in the parts tank if you want. I can also powdercoat it for extra if you want. $65 shipped.
SPAL 9-10" fan, removed from a b&m transmission fluid cooler. Blades are 9" wide, fan itself is almost 10". Comes with mounting legs and 4 bolts. Simple 2 wire 12v power supply. $25 shipped.
Stock 4l60e trans cooler lines cut to bypass radiator and go straight to fluid cooler. Lets you keep your original lines without cutting them. $2 plus actual shipping.
Also have these parts in other threads.
custom twin turbo kit: https://www.performancetrucks.net/fo...d.php?t=407729
long tube headers and extension pipes to stock catback: https://www.performancetrucks.net/fo...d.php?t=471022
Shipped prices good for the 48 US only. I accept paypal for payment. Will combine shipping for multiple parts. I am an ebay powerseller of 1790+ positives and a paypal seller of 1350+ verified transactions since 2000.
Stock LQ4 cam from the same zero mile crate motor $45 shipped. (no pics as it is holding the lifters up in my LS6 right now until my big cam comes in the mail tomorrow)
set of 16) stock pushrods. They are actually aftermarket (sealed power) stock replacements. They have about 34k miles on them. $25 shipped
hydroboost pressure hose from ps pump to hydrboost pump. Removed from an 02 escalade. Tested no leaks. $20 shipped.
custom made bracket to use car intake on truck motor. When using the car intake the throttlebody hits the alt/ps bracket where the idler pulley is so you have to cut it off. This bracket goes on that big bracket and gives you a place to relocate the idler pulley to. I powdercoated it flat black. $50 shipped.
stock alt/ps bracket with idler pulley. No problems. I can powdercoat this if you want for a little extra. I can also modify it for a car intake as mentioned above. $45 shipped.
Set of truck motor mounts from my 02 denali, 120k, no issues that I know of. I painted them black a couple years back. $25 shipped (they are actually kind of heavy so shipping will be about $15 for me).
USED felpro intake gaskets for 00-06 truck intake. About 35k miles I'd guess. They look fine and reuseable to me. New cost is $40. $15 shipped.
Truck motor oil filler tube with cap $10 shipped.
Truck oil pan with pickup and windage tray. Little dirty but no known cracks or problems. I can clean it in the parts tank if you want. I can also powdercoat it for extra if you want. $65 shipped.
SPAL 9-10" fan, removed from a b&m transmission fluid cooler. Blades are 9" wide, fan itself is almost 10". Comes with mounting legs and 4 bolts. Simple 2 wire 12v power supply. $25 shipped.
Stock 4l60e trans cooler lines cut to bypass radiator and go straight to fluid cooler. Lets you keep your original lines without cutting them. $2 plus actual shipping.
Also have these parts in other threads.
custom twin turbo kit: https://www.performancetrucks.net/fo...d.php?t=407729
long tube headers and extension pipes to stock catback: https://www.performancetrucks.net/fo...d.php?t=471022
Shipped prices good for the 48 US only. I accept paypal for payment. Will combine shipping for multiple parts. I am an ebay powerseller of 1790+ positives and a paypal seller of 1350+ verified transactions since 2000.
Last edited by RotaryResurrection; 11-17-2010 at 12:22 PM.
#3
On The Tree
iTrader: (4)
Join Date: Feb 2010
Location: Los Angeles CA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Stock 4l60e trans cooler lines cut to bypass radiator and go straight to fluid cooler.
cut them.. after the second bend.. nice clean cut. and ill buy the from you. its for a custom application on my truck.. these fit on to the c-clip bolts on the side of the trans right..
rhinosarge@gmail.com
cut them.. after the second bend.. nice clean cut. and ill buy the from you. its for a custom application on my truck.. these fit on to the c-clip bolts on the side of the trans right..
rhinosarge@gmail.com
Thread
Thread Starter
Forum
Replies
Last Post
SLOPONY
GMT 800 & Older GM General Discussion
20
10-18-2016 06:05 AM
5.3lSilverado
GM Engine & Exhaust Performance
25
08-29-2016 12:48 AM