Turbo 4.8 Part-Out
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Turbo 4.8 Part-Out
Winter is coming up fast, and I have been swamped at the shop, so I am going to start tearing the Caprice apart so I can get a solid head start on the updates for next season. I am making some major changes, so a lot of stuff is going!
All prices are OBO but I am in no rush to give stuff away so please save your time and mine with the low *****.
Check back often, as I will have more parts to list.
Thanks for looking!
Brandon
413-455-9795
*Here is the list:*
________________________________
-200k Mile 4.8 Long Block 800.00
No oil pan, valve covers or intake. Everything else stays including all the stainless cover hardware...
Comp Thumpr 54-600-11
Trick Flow 7.4 Pushrods
Brian Tooley Springs (obviously not the ls9 springs in the pic)
This motor still runs mint. If you contact me before I sell other parts off the car, I will take you for a ride. Its absolutely amazing how well this stupid 4.8 runs and refuses to break. You are basically paying for the cam, pushrods and springs, and in return you are getting a 4.8 for free LOL -800.00-
___________________________________
Fabricated Turbo Hot Side 1300.00
NO TURBO @ above price
GTO Manifolds V-Banded down to 2.25"
2.25" V-Banded 409 crossover T4 Flanged
Turbonetics RG45 Gate and 304 Dump Tube
3"-4" 304 V-banded Fender Exit
This kit fits well with truck intakes or any of the high-rises (car intake will not work). This setup was built around my 1981 Caprice, but would obviously work in other applications being an up & over style setup. -1300.00-
______________________________________________
-Ebay Valve-Covers -12an Bungs Welded in 175.00
Never leaked on me once, upgraded the china hardware to stainless socket head. -175.00-
__________________________________________________ ______
-Trick Flow Steam port Fittings, Expansion Tanks & Custom lines -350.00
Setup I put together is designed to run perimeter of intake with front mounted Expansion tank. -4an feeds -10an return, all quality Fragola fittings and hose. -350.00-
All prices are OBO but I am in no rush to give stuff away so please save your time and mine with the low *****.
Check back often, as I will have more parts to list.
Thanks for looking!
Brandon
413-455-9795
*Here is the list:*
________________________________
-200k Mile 4.8 Long Block 800.00
No oil pan, valve covers or intake. Everything else stays including all the stainless cover hardware...
Comp Thumpr 54-600-11
Trick Flow 7.4 Pushrods
Brian Tooley Springs (obviously not the ls9 springs in the pic)
This motor still runs mint. If you contact me before I sell other parts off the car, I will take you for a ride. Its absolutely amazing how well this stupid 4.8 runs and refuses to break. You are basically paying for the cam, pushrods and springs, and in return you are getting a 4.8 for free LOL -800.00-
___________________________________
Fabricated Turbo Hot Side 1300.00
NO TURBO @ above price
GTO Manifolds V-Banded down to 2.25"
2.25" V-Banded 409 crossover T4 Flanged
Turbonetics RG45 Gate and 304 Dump Tube
3"-4" 304 V-banded Fender Exit
This kit fits well with truck intakes or any of the high-rises (car intake will not work). This setup was built around my 1981 Caprice, but would obviously work in other applications being an up & over style setup. -1300.00-
______________________________________________
-Ebay Valve-Covers -12an Bungs Welded in 175.00
Never leaked on me once, upgraded the china hardware to stainless socket head. -175.00-
__________________________________________________ ______
-Trick Flow Steam port Fittings, Expansion Tanks & Custom lines -350.00
Setup I put together is designed to run perimeter of intake with front mounted Expansion tank. -4an feeds -10an return, all quality Fragola fittings and hose. -350.00-
Last edited by bfurches; 09-11-2014 at 08:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
03regcab sierra
Dynamometer Results & Comparisons
20
08-03-2015 12:11 AM