stock48

iTrader: (16)

I have a new Turbonetics T66, .81AR P trim. I just recieved the unit from Turbonetics last week, has the blue oil and all. It is the warranty replacement they sent me for the T66 I blew up. It is the latest version. I went up to a T76 when the T66 originaly blew, so I have no use now for the T66. They sell for $1000.00 Im asking $875.00

stock48

iTrader: (16)

dan96z71

That would fit nicely under my hood....hmmmm wonder how that would change my setup?

stock48

iTrader: (16)

If you had a 6.0 it would be right at home, but it is a little big for low boost on a 5.3. It would work well for higher boost #'s 10PSI and above on your 5.3. Under 10PSI you would be better off with your T62, it will spool slightly faster.

mike06tork

iTrader: (5)

will it work with a 6.0 370 forged at 9.0 compression let me know asap

stock48

iTrader: (16)

How much boost, and power are you looking to run? It works really well up to 12-13PSI on a 6.0L might. Which should get you to around 600RWHP. Might be good for a little more. It is the best spoolup- vs- power for the street. My T76 makes more power above 12PSI, but is really laggy compaired to the T66. Let me know if that is the power range you are looking for, and we can go from there.

stock48

iTrader: (16)

Bill Reid

iTrader: (14)

Nice turbo... and yes... it will work on a 5.3... with a stall

Bill

stock48

iTrader: (16)

It would easily support 15+PSI on a 5.3 at sealevel.

mike06tork

iTrader: (5)

well im looking 600 rwhp if possible but im fine with over 500 rwhp. hey Its my daily driver right now im getting my engine rebuilt its a 6.0 30 over 370 so im looking something that it will work fine. I know the t76 is better but its rated up to 1100 hp and im not looking that much hp i want around 11 psi and 500 hp to 600 hp im fine with , so let me know asap.