I have for sale a Victor jr. efi intake and intake elbows.com intake elbow. The intake will come with the fuel rails and all black AN fitting to connect to stock fuel line for returnless setups or can be modified to go to a FP regulator. I would like to get $500.00 shipped for it. I have only ran this intake for about 600miles

Here is a pic of it installed on my truck(doesn't come with throttle body or injectors)

 

did it do anything went you had it on any befor/after numbers?

 

I don't have any before numbers....I put it on when i put the D1sc on my truck.

thanks,
Jed

 

what kind of injectors are you running with this setup? Well it work with the ev6 short injectors?

 

bump for a nice intake. youll have to use the long ls1 injectors.

 

I just bought new l92 rails and injectors and the plugs to make them work...

 

What if you cut the spacers down. Then can you run the shorty truck style ones??? Not to jack the thread Jed, but I been meaning to ask the ??

 

Im sure they could be shortened. In this pic you can see he bracket on how its made, just cut the bracket shorter and drill some new holes that go thru the rails once you have the injectors in. You will for damn sure want to make sure the rail is all the way down on the injectors and the injectors are in the intake, they will pop out and catch on fire.. i know..

 

Yah I have a vic set up along with the edy rails. I am going to run the injectors from srt10kllr(sp) and they are reworked truck injectors to flow more then my current 60's.. It will be trail and error, but i think I can make it work...

 

Why you asking questions if you already know what your gonna do.. If you know what your doing and think it will work, just do it geez