Gus 82

iTrader: (2)

Selling cam that came out since I went a bit smaller. Cam is for engines that have 12606358 cam phaser. I installed in a 4.8 ext cab 4x4 with 3.42 and a 2800 converter and it was just to much to tow with. I didn't have much vac to stop my boat so it had to go. If you have a regular cab 4.10 and 3400+ stall I think it would work good in a 4.8. It really came to life after 3400. I have some idle clips also and it sounds really good at a 800 rpm idle. Specs are 219/229 .550/.550 114 and was put in this last March. Only really use truck when I need to pull boat so it may have 2000 miles on it. 150.00 obo.

Gus 82

iTrader: (2)

bump.

gamble686

iTrader: (3)

4.8=needs 3200+ stall and 4.10+
5.3=needs 2800+ stall and 3.73+
6.0/6.2=mean cam will work with or without a stall and gears.
Bump for a killer deal.

watkins911

I'd be interested. Message for number? We can talk.

Gus 82

iTrader: (2)

Sorry havent been on for a while pm'd you and you may txt, I work in a call center so its hard for me to be on the cell during work...

Gus 82

iTrader: (2)

Bump.

GREENMILE

iTrader: (8)

sounds badass below 1k rpms... bump for ya

gary2k7

So it would work perfectly 6.0 that that's pretty much stock

Gus 82

iTrader: (2)

Yea as long as you have VVT it will work fine. I ran with the LS6 springs and a 7.4 pushrod in my app.

Gus 82

iTrader: (2)

bump.