WANTED: Gen-VI 502 big block, bare
03-10-2009, 08:31 PM
#1
WANTED: Gen-VI 502 big block, bare
I have need for a Gen-VI 502 GM bigblock - bare.
(This is a 1-piece seal factory roller-cam siamesed-bore BBC, 9.8" short deck, 4.47" bore)
A current-generation Sportsman block (1-piece seal) would be even better, but these are very rare.
Not looking for pistons, rods, or crank, just the block with the caps.
The block will be overbored to 4.5", so cylinder condition is not a concern as long as there are no cracks or porosity. Even if a piston melted, still okay.
I can pickup anywhere from Los Angeles to Las Vegas, will need shipping otherwise. (These weigh 270 pounds empty.)
I can pay cash, Paypal, Money Order, Check, whatever.
Thanks
(This is a 1-piece seal factory roller-cam siamesed-bore BBC, 9.8" short deck, 4.47" bore)
A current-generation Sportsman block (1-piece seal) would be even better, but these are very rare.
Not looking for pistons, rods, or crank, just the block with the caps.
The block will be overbored to 4.5", so cylinder condition is not a concern as long as there are no cracks or porosity. Even if a piston melted, still okay.
I can pickup anywhere from Los Angeles to Las Vegas, will need shipping otherwise. (These weigh 270 pounds empty.)
I can pay cash, Paypal, Money Order, Check, whatever.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
thompson
Sponsor's Announcements, Sales, and Specials
4
09-30-2015 09:48 AM
