WCCH 5.3 stage 1 head, pushrods, fms224, melling oil pump fs
08-09-2012 | 01:31 PM
#1
Thread Starter
TECH Enthusiast
iTrader: (24)
Joined: May 2007
Posts: 646
Likes: 0
From: Stockton, Ca
WCCH 5.3 stage 1 head, pushrods, fms224, melling oil pump fs
First up I have a set of wcch stage1 5.3 heads that have been milled .030 and have a set of patriot dual golds installed with the larger valves. They have around 15k on them and I gained 20rwhp by adding these. I'm asking Sold obo.
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Next up I have a set of manley 7.350 long pushrods they have the same mileage as the heads. Asking Sold
[IMG]
[/IMG]
I have a melling 10295 oil pump that is lightly used less than 1k miles. I'll include the red high pressure spring, but the pressure screw is stripped. So I'm asking $60 obo.
[IMG]
[/IMG]
Lastly I have a futral 224/224 cam on a 112 lsa it has 10k on it and I'm asking Sold obo. I'll add pics when I remove the cam.
THanks Nick
[IMG]
[/IMG][IMG][/IMG][IMG][/IMG]Next up I have a set of manley 7.350 long pushrods they have the same mileage as the heads. Asking Sold
[IMG]
[/IMG]I have a melling 10295 oil pump that is lightly used less than 1k miles. I'll include the red high pressure spring, but the pressure screw is stripped. So I'm asking $60 obo.
[IMG]
[/IMG]Lastly I have a futral 224/224 cam on a 112 lsa it has 10k on it and I'm asking Sold obo. I'll add pics when I remove the cam.
THanks Nick
Last edited by nickpc82; 08-13-2012 at 03:50 PM.
