WCCH 5.3 Stage 1 Heads
#1
Staging Lane
Thread Starter
Join Date: Oct 2005
Location: Escondido, CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
WCCH 5.3 Stage 1 Heads - SOLD
SOLD!
Still in the box! Changed my direction on the project.
I paid just over $1000, plus $200 core charge, plus shipping.
Yours for the LOW LOW price of $850 shipping included to the lower 48.
West Coast Cylinder Heads
GM 5.3 heads, 706 casting
Stage 1 porting
S/S valve job w/ 1.940" intake & 1.570 SS exhaust valves
Surfaced .030"
Valve seals
Manley Valve springs #221428-16 (rated to .600 lift)
Comp Cams Pushrods 7367-16
build sheet included
Pics here
Still in the box! Changed my direction on the project.
I paid just over $1000, plus $200 core charge, plus shipping.
Yours for the LOW LOW price of $850 shipping included to the lower 48.
West Coast Cylinder Heads
GM 5.3 heads, 706 casting
Stage 1 porting
S/S valve job w/ 1.940" intake & 1.570 SS exhaust valves
Surfaced .030"
Valve seals
Manley Valve springs #221428-16 (rated to .600 lift)
Comp Cams Pushrods 7367-16
build sheet included
Pics here
Last edited by scott2004; 09-06-2007 at 09:35 AM. Reason: Added link to pics
#3
TECH Addict
iTrader: (18)
Join Date: Oct 2003
Location: Northeast, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
I've got the same heads, and I got 15-20 hp and 20-35 lb-ft of torque. My peak hp is off though becasue I have a little cam (210 intake). I'm sure it will pick up once I get a bigger cam in there.
#7
Staging Lane
Thread Starter
Join Date: Oct 2005
Location: Escondido, CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by babydeuce
Interested! Can we get some pics? Are the pushrods shortened to match the Mill job? What are the springs rated at lift wise?
Jack
Jack
Springs are rated to .600 lift. Here is a link to the same springs on Summit: http://store.summitracing.com/partde...5&autoview=sku
Yes, the pushrods are shortened to match the mill job.
I'll open one and post up some pics later today.
Trending Topics
#8
TECH Addict
iTrader: (18)
Join Date: Oct 2003
Location: Northeast, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Moddoo
tdrumm,
Decent #s, I would guess they will give more power everywhere, not just at peak.
what CR were you running?
These ones are cut .030"
Decent #s, I would guess they will give more power everywhere, not just at peak.
what CR were you running?
These ones are cut .030"
I compared my dyno graphs before and after and it was funny because the gains started out great in the low end, but I peaked and stayed flat at 316 hp at 5200 rpm. Before the heads I peaked at 310 hp around 5900 rpm. So you can see that the heads are working, I just needed more cam to get the rest of the top end potential out of these heads.
#10
Staging Lane
Thread Starter
Join Date: Oct 2005
Location: Escondido, CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sport Side
Scott, would you be able to post any pictures of the heads?