WTB ' NNBS oil pump
12-28-2009, 07:39 PM
#1
Banned
Thread Starter
iTrader: (4)
Join Date: Sep 2008
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
WTB ' NNBS oil pump
looking for a oil pump ,mine took a dump after the engine blew..
my part number off my oil pump is #12612289
im not sure if any LSX oil pump would work....
New or good conditions...
my part number off my oil pump is #12612289
im not sure if any LSX oil pump would work....
New or good conditions...
Last edited by lucky77; 12-31-2009 at 08:43 AM.
12-31-2009, 09:02 AM
#3
I have a stock NNBS oil pump from my 6.0. It has 3000 miles on it. No problems with it just replaced the whole engine with forged and guy I sold motor to did not want oil pump. Mine was VVT and DOD so it would be higher volume pump. Not for sure on part number but could get it if needed.
12-31-2009, 11:51 AM
#4
The pump that Scooter is talking about is a great pump! I am running this same high volume pump in my non DoD 6.0L. I get about 45-50 psi hot idle and anything over 3K rpm's is 80+ psi. Just make sure to use a low tension relief spring in the pump so that your oil pressure doesn't go crazy high. Trust me, with a manual transmission I run for long periods of time at 6K rpm+ and never have seen the oil pressure drop. Don't believe that crap about sucking the oil pan dry. Jump on it 
12-31-2009, 11:53 AM
#5
Or just order this one new from Lingenfelter: http://www DOT lingenfelter DOT com/mm5/merchant.mvc?Screen=PROD&Store_Code=LPE&Product_Co de=L200135297&Category_Code=C54 like I did
Thread
Thread Starter
Forum
Replies
Last Post
Ferocity02
GM Parts Classifieds
1
07-17-2015 07:05 PM
