CBODYAV

I have a 2001 LQ4 engine block on a stand dissasembled, block had around 61,000 miles on it before Gm Service District Service Rep decided to replace it because customer complained of knocking during cold starts! We all know that the GEN III did this and is considered normal! Block was hot tanked and honed. Bought eight new LQ9 Escalade flat top pistons with coating from GM which cost me over $500 and had them pressed on the LQ4 connecting rods. I have a newer intake manifold, cam, springs and rods that I purchased here. I also had the heads cleaned but it does need new int/exh valves as well as gaskets, lifters and rocker arms. I also have the oil pan and oil pick up and valve covers. I have the stock crank but I think it would require a new one since this one got rusted. The block also has new cam bearings, but needs crank bearings and piston rings. I will include engine stand in transaction!
I would like to trade all of this for a set of 20's or 22's on aggressive tires!!!

I have posted pictures of the block and heads!

Let me know if you are interested!

Cbodyav!

1bad5.3

iTrader: (2)

I have a set of 20" boss wheels on 285/50/20 here is what the wheels look like also I am located near st.louis,MO. 2tires are less than 1200 miles old and the others have about 12-15k on them

matt//

iTrader: (1)

sorry I couldn't go through with ya.

Bump for a good seller though!

CBODYAV

BUMP

Anyone want to trade?

CBODYAV

Bump!!

CBODYAV

Bump!

aronjr84dd

do you still have the motor

CBODYAV

Yes I still have the motor, no one has offered me a trade yet. So I am waiting patiently.

QQuiksilverado

I have some 20" Rozzi Switch rims that I will get powdercoated the color you want but no tires except some used ones that don't have much tread left.

CBODYAV

I am interested, post some pictures of your rims.
Why would you powdercoat these rims a different color?