bluecajun5.3

iTrader: (31)

i am in need of them.
could yall point me in the right direction on where to get some?

thanks,
Lance

1Bear

iTrader: (1)

You may not be wanting to get them from the dealer and as I recall they were fairly expensive for what they are, but never the less the part numbers I have for the connectors to the motors are: 88987983

KySilverado

iTrader: (7)

These will work.

http://cgi.ebay.com/ebaymotors/85-02...Q5fAccessories

bluecajun5.3

iTrader: (31)

thank you!

i already have a black bear harness but it is setup for the ls1/lt1 style fans. it's the same connector you just posted. i thought they different from the truck efan connectors?

Derek @ EDO

iTrader: (73)

They are different but will work.

bluecajun5.3

iTrader: (31)

thanks Derek! work with a lil modification i'm guessing?
i don't have the fans yet, that is why i'm asking so i can get it done all at once and not waiting/hunting down parts...

Derek @ EDO

iTrader: (73)

They actually plug right in, ill snap a pic for you where you can have a better understanding.

KySilverado

iTrader: (7)

Yeah they will plug in and work, seal up. I had to just trim the snap/lock a bit to get it to fit just so.

Derek @ EDO

iTrader: (73)

As you can see, the LS1 plug retaining clips are slightly wider than the 05+ fan plug in.

If you cut off, with a razor blade knife the plastic encircled on the LS1 clips it will be perfectly functional with the 05 fans, if you do not trim the connector it will not seat within the groves and can potentially vibrate off.

Derek

bluecajun5.3

iTrader: (31)

man yall are the best!
thanks for the quick response and for the explaining Derek and Roger!