411 ecm swap?????????
#11
TECH Fanatic
Join Date: Oct 2005
Location: Woodstock Ontario Canada
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Info on what?
Swap in the 411 into a 1996, 97 or 98-00 GMT 400 truck and anyone who uses HPTuners or EFILive can tune them.
Contact Lextech and he will give tyou the conversion spreadsheet to take out the blackbox and install the 411.
you can rev over 600rpm with the blackbox, the stock rev limit is 5600rpm and refuels at 5400rpm, but this can be raised to the blackbox's hardlimit of 6000rpm. Its just like the GEN 2 LT1 PCM's hardlimit of 7200-7300rpm.
Its not the blacjbox PCM that doesn't allow for datalogging, its the makers of the aftermarket tuning systems deciding not to include it. Tech 2 has no issues logging the 1996/97 and 98-00 GMT 400 blackbox PCM's.
peace
Hog
Swap in the 411 into a 1996, 97 or 98-00 GMT 400 truck and anyone who uses HPTuners or EFILive can tune them.
Contact Lextech and he will give tyou the conversion spreadsheet to take out the blackbox and install the 411.
you can rev over 600rpm with the blackbox, the stock rev limit is 5600rpm and refuels at 5400rpm, but this can be raised to the blackbox's hardlimit of 6000rpm. Its just like the GEN 2 LT1 PCM's hardlimit of 7200-7300rpm.
Its not the blacjbox PCM that doesn't allow for datalogging, its the makers of the aftermarket tuning systems deciding not to include it. Tech 2 has no issues logging the 1996/97 and 98-00 GMT 400 blackbox PCM's.
peace
Hog
Thread
Thread Starter
Forum
Replies
Last Post
oharajo
Tuning, Diagnostics, Electronics, and Wiring
2
07-18-2015 09:24 PM
Nimoryan
GMT 800 & Older GM General Discussion
0
07-05-2015 03:50 PM