Was doing some research, as cast 4.06 bore that would be sweet with my crank and some new pistons

They want almost 1300 for it new

 

Let me know when you find some complete heads...... I want some!

 

Why ur bore is on the small side for the large valves they have not to mention all the other conversion parts needed.

 

It doesn't take too much for the conversion. I've got a set of l92 heads sitting right front of me.

 

You can get the L92 heads and intake from GMPP. The intake comes with the 40 pph injectors and the DBW t-body.

peace
Hog

 

I have a set of L92 heads as well. Finding complete ones isn't easy at this moment. All new ones are going into production engines. Here is a set.
link

 

I dont care about the heads, I want the complete shortblock, the LS7 heads have alot more potential for less work.

 

And a lot more money. The LS7 heads aren't exactly cheap. You can't complain to have $800 in a set of heads that flow very competively with a set of 225 AFR's

 

Im not concerned with heads Im getting some from WCCH that are going to be alot better for higher boost, just wondering if anyone knows what the going rate is on teh blocks. The crank are really cheap for them brand new but the rods are damn near 80 a piece, LS7 titanium rods can be had for 83 a piece The L92 heads are thin, according to Richard and wouldnt hold up well to the 20+psi the stroker motor will see.

 

give sdpc2000 a call about the l92's