Regency04

iTrader: (3)

I was looking at my buddies GTO and the speedo goes up to 200mph and the tach goes up to 7k rpms is there anyway to make it work in my truck i didn't know if it will just plug in or what. I know i'd have to custom mount it and stuff but that would be the easy part.

wastedrubber

iTrader: (10)

i'm sure it wouldn't just plug in. with the pin schematics for the cluster and the schematics for the wiring in the truck, you could probably make it work. but it wouldn't be easy.

silver-mod-o

iTrader: (15)

I'm sure the calibration in the PCM is all different... I think it'd probably be more trouble than it would turn out to be worth. JMHO though.

Regency04

iTrader: (3)

Out of all the custom trucks nobody has tried anything like this

quicksilverado

iTrader: (8)

Talk with Speartech. I bet they could make one work with a truck.

BlownChevy

iTrader: (20)

Good luck, that car has a different BCM....it will never work with the truck.

Regency04

iTrader: (3)

What about one out of a SSR truck

doublenot

iTrader: (12)

you should just do some custom autometer gauges, I think 2toneblown did this, looked pretty good. Then you could have any tach or speedo you wanted.

low5.3silverado

Do you guys happen to know were he got that carbon fiber part?


Thanks