Ok I have found out what the stock tq specs are for the heads, but since factory bolts are TTY, the A R P's that I have are not. I have looked on arps site and didn't find anything on the head specs only connecting rods. Can I just tq these A R P's to the factory spec's.. Any info would help out.. thanks much.. yes I tried a search and didnt find what I needed..
JOHN

 

ummm anybody

 

http://ls1howto.com/index.php?article=2

thats what i used when me and a bud did my head swap.

 

Yah thanks i ahve that but I rember seing some where that with the arp bolts it is posed to be different, if I don't get any responses on it i am going to just do it back to the fac specs with the arp's... THANKS JOHN

 

ARP head bolts M11 70ftlbs with arp lube or 85ftlbs with 30 wt oil

M8 23ftlbs or 29 ftlbs

right off the ARP directions

 

Ok thanks where the hell did yah find that at, i must be blind..

Thanks John

 

I have a box of them in front of me.

 

Damn I am a pure fuktard I didn't even think to look on the box,wtf, now it is tossed, I am going to do them to 80, I just used reg asm lube, all this new arp lube stuff is new to me, so 80 sounds like a happy medium.. Thanks John

 

hmm, so the directions to torque them if using arp head bolts on that site is wrong?

 

Ummm dunno. But I certainly like having actuall numbers then white lines on the tops of the bolts... lol Man I have a headache.. lol

John