jow02327

iTrader: (21)

Started mounting my gauges and went to hook up the fuel pressure sending unit and the fuel rail has a valve stem type bung and the sending unit has a male end also. what do i need to do is there some adapter i can get or what? Thanks in advance
Jed

02BlueStepside

iTrader: (1)

I will have to find what I used, but I have a T from casper and 2 other Earls fitting to connect my gauge. The casper T isn't necessary, but it still has the schrader valve so you can release the pressure from the lines.

jow02327

iTrader: (21)

if you could get me the part numbers it would be greatly appreciated. thanks in advance ,Jed

02BlueStepside

iTrader: (1)

Alright, heres what I used...

Caspers Electronics, a schrader tee part # 102071 Click Here
Earls -4 to 1/8 NPT adaptor part #916104ERL Click Here
Earls 1/8 NPT coupling part #991001ERL Click Here


Also, the casper schrader tee is not needed, but I wanted to retain the pressure relief valve (schrader valve), so that one is optional.

jow02327

iTrader: (21)

i appreciate it very much man if it wasnt for people like you and this site i would be lost sometimes thanks
Jed

02BlueStepside

iTrader: (1)

No problem, I went throught the same thing when hooking up my fuel pressure gauge. I actually had to go back to my original thread to find the part numbers.