TylerCustoms

i see, well go to the stealership and have them examine the latch and give them ur concern...

CashDudeHomie

iTrader: (5)

The bumpstops unscrew and screw themselves very easy. I put some JB weld on the threads of mine. Now they aren't going anywhere

SIKDMAX

iTrader: (8)

I had to add some loctite to mine.

viciousknid

iTrader: (8)

I found the problem and don't know why I never noticed before. Ontop of the fenders there are some rubber boots that are clipped on. The one on my driverside is missing so its bouncing up and down because of the lack of resistance.
Adjusting the bump stops would just make the hood higher than It needed to be. Ordered one today.
I never mentioned but the pass side was always higher than the driver side but both stops were set. I always thought it was a problem on the pass side headlight but nope.

dlt76028

iTrader: (13)

problem solved... good job.

BTW i got that circle d in and its alot tighter, it feels pretty much like my old TB stall and it flashes to 2800 or so. its alot easier to drive my truck now and i like that. when i first put it in reverse i almost went into another car lol. im used to it not moving in gear.

viciousknid

iTrader: (8)

Good to hear. Your gonna get a lot better mileage.

viciousknid

iTrader: (8)

BTW: That part was a bit over $6 so if you need one, find a wrecked vehicle to take it from. damn

JoeGibbSilverado

iTrader: (9)

anytime you buy parts from the dealer, bend over while handing them the cash