Leaking rear seal?
#21
The paste that was around the head of the plug was very wet and mushy, like it just came out of the can....never got a chance to dry out.
The builder suggested maybe using 3M Weatherstrip Sealant which I assume is this stuff: 3M
I was also considering BRP gasket sealing compound used on many of the bolt threads on 2-stroke outboard motors. It looks like brown contact cement without being stringy going on. They say it's non-hardening, but it sets up solid where exposed to air. I've used it on outboard intake bolts that protrude into the crankcase. O.M.C. - OMC Gasket Sealing Compound
The builder suggested maybe using 3M Weatherstrip Sealant which I assume is this stuff: 3M
I was also considering BRP gasket sealing compound used on many of the bolt threads on 2-stroke outboard motors. It looks like brown contact cement without being stringy going on. They say it's non-hardening, but it sets up solid where exposed to air. I've used it on outboard intake bolts that protrude into the crankcase. O.M.C. - OMC Gasket Sealing Compound
Thread
Thread Starter
Forum
Replies
Last Post
05GMC4.8
GMT 900 Trucks General Discussion
5
08-07-2015 09:55 PM