misfires
#12
PT's Slowest Truck
iTrader: (19)
From what I've read, injector failures are more common than coils. If you have an old spark plug, you can plug it in the end of the wire, then ground it (jumper wire wrapped around the threads and attached to good ground on engine), and start the truck to see if you have adequate spark, if so, the coil and wire are good on that cylinder.
Thread
Thread Starter
Forum
Replies
Last Post
legerwn
Tuning, Diagnostics, Electronics, and Wiring
56
11-15-2015 10:21 PM
Tydriver
GM Engine & Exhaust Performance
45
10-23-2015 09:19 PM