not tryin to get a flame goin, just postin new mods
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: telephone tx
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
not tryin to get a flame goin, just postin new mods
i just finished my nitrous install yesterday, and i got my bottle filled today.
all i can say is :o 8) :wink: :worship: :beerchug: :thumbsup: :o 8) :beerchug: :thumbsup:
spray from dead stop =
spray from 25 punch :worship: :worship:
when i spray at 30 punch on dry sticky pavement it breaks loose for a sec, hooks then pulls, shifts to second, breaks loose for a bit hooks and pulls like a peterbuilt.
20-70 takes about 3-3.5 seconds. didnt go past that cause i had my dad with me. i was already speeding in a 55 (waaaay out in the country)
my a/f ratio guage showed it was still rich at WOT with nitrous.
I will have pics as soon as i get either imagestation or yahoo to let me upload them.
ask ?'s, any and all will be answered if at all possible
all of the lines are covered with wire loom, and nothing is visible but the nozzle. that will be fixed in time :wink:
here is my new grills that i made
http://www.imagestation.com/picture/...7.jpg.orig.jpg
here is a closer one
http://www.imagestation.com/picture/...2.jpg.orig.jpg
the box under my bedcover.
http://www.imagestation.com/picture/...1.jpg.orig.jpg
heres the bottle inside the box
http://www.imagestation.com/picture/...2.jpg.orig.jpg
these next ones will show the full throttle switch
http://www.imagestation.com/picture/...a.jpg.orig.jpg
http://www.imagestation.com/picture/...a.jpg.orig.jpg
here is where my nitrous and fuel solenoids are hidden, notice my cool green intake
http://www.imagestation.com/picture/...3.jpg.orig.jpg
heres the nozzle
http://www.imagestation.com/picture/...9.jpg.orig.jpg
heres the full intake
http://www.imagestation.com/picture/...2.jpg.orig.jpg
all i can say is :o 8) :wink: :worship: :beerchug: :thumbsup: :o 8) :beerchug: :thumbsup:
spray from dead stop =
spray from 25 punch :worship: :worship:
when i spray at 30 punch on dry sticky pavement it breaks loose for a sec, hooks then pulls, shifts to second, breaks loose for a bit hooks and pulls like a peterbuilt.
20-70 takes about 3-3.5 seconds. didnt go past that cause i had my dad with me. i was already speeding in a 55 (waaaay out in the country)
my a/f ratio guage showed it was still rich at WOT with nitrous.
I will have pics as soon as i get either imagestation or yahoo to let me upload them.
ask ?'s, any and all will be answered if at all possible
all of the lines are covered with wire loom, and nothing is visible but the nozzle. that will be fixed in time :wink:
here is my new grills that i made
http://www.imagestation.com/picture/...7.jpg.orig.jpg
here is a closer one
http://www.imagestation.com/picture/...2.jpg.orig.jpg
the box under my bedcover.
http://www.imagestation.com/picture/...1.jpg.orig.jpg
heres the bottle inside the box
http://www.imagestation.com/picture/...2.jpg.orig.jpg
these next ones will show the full throttle switch
http://www.imagestation.com/picture/...a.jpg.orig.jpg
http://www.imagestation.com/picture/...a.jpg.orig.jpg
here is where my nitrous and fuel solenoids are hidden, notice my cool green intake
http://www.imagestation.com/picture/...3.jpg.orig.jpg
heres the nozzle
http://www.imagestation.com/picture/...9.jpg.orig.jpg
heres the full intake
http://www.imagestation.com/picture/...2.jpg.orig.jpg
#3
Launching!
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: telephone tx
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
4.56 motive gears, removed cat, Full-Bore muffler, dropin k&n, traction bars, a/f ratio guage.
3/5 drop, and some more visual mods.
it ran a 8.87 @ 76mph in the 1/8th before nitrous. i hit second at 68mph so it dont pull much at the last of the 1/8th. but withthe nitrous, it is rediculous.
i see maybe 7 second passes and 12's in the 1/4 if i play my cards right.
1st is nonexistant on the street if you spray, i did it once just for fun
from a dead stop it goes through first faster then if you revve it in neutral.....no sh it
i will hopefully be goin to the 1/8th mile track saturday, i will be launchin without nitrous and hittin it at around 20mph. it should stick at the track. should make for a fun night. so if anyone is around the greenville dallas area i will be at redline raceway in caddo mills this saturday.
come and watch the fun.
3/5 drop, and some more visual mods.
it ran a 8.87 @ 76mph in the 1/8th before nitrous. i hit second at 68mph so it dont pull much at the last of the 1/8th. but withthe nitrous, it is rediculous.
i see maybe 7 second passes and 12's in the 1/4 if i play my cards right.
1st is nonexistant on the street if you spray, i did it once just for fun
from a dead stop it goes through first faster then if you revve it in neutral.....no sh it
i will hopefully be goin to the 1/8th mile track saturday, i will be launchin without nitrous and hittin it at around 20mph. it should stick at the track. should make for a fun night. so if anyone is around the greenville dallas area i will be at redline raceway in caddo mills this saturday.
come and watch the fun.
#7
Launching!
Join Date: Apr 2003
Location: college station, tx
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by -= MacADaYear =-
Maybe you should mention you have a DODGE when posting on the LS1TECH site....